Type: Trad, 300 ft (91 m), 4 pitches, Grade II
GPS: 40.40681, -105.5372
FA: Bill Wilie, Randy Joseph, and Eric Ming, 1981; direct start: Hidetaka Suzuki, 1980s
Page Views: 1,668 total · 6/month
Shared By: John Tormalehto on Jan 26, 2004
Admins: Leo Paik, John McNamee, Frances Fierst, Monty, Monomaniac, Tyler KC

You & This Route


3 Opinions
Your To-Do List: Add To-Do ·
Your Star Rating:
Rating Rating Rating Rating Rating      Clear Rating
Your Difficulty Rating:
-none- Change
Your Ticks:Add New Tick
-none-
Use onX Backcountry to explore the terrain in 3D, view recent satellite imagery, and more. Now available in onX Backcountry Mobile apps! For more information see this post.
Warning Access Issue: 2026 Seasonal Raptor Closures lifted DetailsDrop down
Warning Access Issue: Closure Notice DetailsDrop down

Description Suggest change

This climb is excellent, the epitome of Lumpy face climbing. This route ascends the 300 foot, bluntish arete between the ...Mariner  and Handbook. Start on the same grassy ledge from which ...Mariner and the Sorcerer start.

P1. Step around left, and jam two parallel cracks to a nice belay ledge with two new bolts, 5.7+ (75').

P2. Face climb up the arete past two bolts; the crux is about 12' above the second bolt. More great face climbing takes you up past some gear and one more bolt (5.9 X). Then locate the belay some 30' or 40' above the third bolt (natural belay), 140'.

P3. Continue up the arete (5.9 R), work up and right past a bolt used on the ...Mariner (5.8 X), and pull over the Sorcerer roof at a finger crack (5.9). Belay after 150'.

P4. Easy rock finds the top (5.5).

Variation: a challenging direct start, "Hard Labor" starts to the right of the first pitch and was put up in the '80s by Hidetaka Suzuki (5.11+). Navigate a cryptic seem sequence, and then follow the leaning crack up to a small ledge with a lone tree. The fist 15 feet is the crux, but the pitch will hold your attention all the way to the anchor. The original fixed pin is now missing.

Protection Suggest change

A standard Lumpy rack (the bolts were replaced with Fixe wedge bolts, stainless steel 3/8" x 2 3/4") on 9-13-03.

Photos

loading