Mountain Project Logo

Routes in Reflector Oven

Chasm Crack T 5.8 5b 16 VI- 15 HVS 4c
Crackin, The T 5.11d 7a 24 VIII 25 E5 6a PG13
Don't Pro the Flake Bro T,S 5.12a/b 7b 26 VIII+ 26 E5 6a PG13
Loki T,S 5.7 5a 15 V+ 13 MVS 4b PG13
Parker Route, The T,S 5.11+ 7a 24 VIII 24 E4 6a
Report to Sickbay T 5.10c 6b 20 VII 20 E2 5b
Strawberry Fields T 5.9+ 5c 17 VI 17 E1 5a
Sunday Crack Fix T 5.8 5b 16 VI- 15 HVS 4c
Tourniquet T 5.10d 6b+ 21 VII+ 21 E3 5b R
Unknown T,S 5.11d 7a 24 VIII 25 E5 6a PG13
Vegetated Crack, The T 5.6 4c 14 V 12 S 4b
When Natural Law Fails T 5.11c 6c+ 24 VIII- 24 E4 6a PG13
Unsorted Routes:
Type: Trad, Sport, 70 ft
FA: Michael Doyle
Page Views: 1,891 total · 29/month
Shared By: Rick Sanchez on Oct 9, 2012
Admins: Aaron Parlier, Jake Jones, Shawn Heath

You & This Route

5 Opinions

Your To-Do List:

Add To-Do

Your Star Rating:

     Clear Rating

Your Difficulty Rating:

-none- Change

Your Ticks:

Add New Tick


Start up the slightly dirty ledge to the slab right of the Yellow Jacket/Mystery Move dihedral. Continuous slab moves with the occasional hold through some bolts to the bolted anchor.


Take the Bushwhack Trail to Reflector Oven. This is the large obvious slab as you walk up the hill towards Strawberry Fields (climber's right of SF).


3 bolts, and some opportunities on the left side of the route for cams/stoppers. The 3rd bolt is over the right edge, and is the last bolt for "The B&H Route."


- No Photos -
Larry S
Easton, Pennsylvania
  5.7 PG13
Larry S   Easton, Pennsylvania
  5.7 PG13
A nice line. Has a mossy green smear above the first bolt and could be a little wet above the second, but you can step over that part. Up to the first bolt protects ok with a 2tcu sized piece, and the horizontal between 1st and second takes either a small cam (.3 Camalot) or a 2" piece. I had to do some gardening with a nut tool to clear some dirt from the cracks. Nothing else needed aside from some draws.

Has 3 bolts for an anchor at the top. One is new, the other two are old rusty cold shuts. The new bolt has some rust on it too. Mar 25, 2013

More About Loki

Printer-Friendly Guide