Mountain Project Logo

Routes in Device Ignitor Boulder

Bunsen Burner V0 4
Device Ignitor Middle V5 6C
Device Ignitor Right V3 6A
Divice Ignitor Left V6 7A
Molotov V1-2 5
Spark Plug V0 4
Zippo V-easy 3
Type: Boulder, 8 ft
FA: unknown
Page Views: 99 total, 7/month
Shared By: Tanner Wixom on Oct 24, 2016
Admins: Andrew Gram, Perin Blanchard, grk10vq

You & This Route

1 Opinions

Your To-Do List:

Add To-Do

Your Star Rating:

     Clear Rating

Your Difficulty Rating:

-none- Change

Your Ticks:

Add New Tick
Sensitive Area Details


Start below the bulge with a left on a small crimp and a right side-pulling on a small sharp flake. Shoot up for a good lip and finish straight up over the bulge with good holds the higher you go.

The hardest move is probably the start.


This is on the north point of the Device Ignitor boulder.


Pads and a spotter. There is a big rock behind the problem that you would likely fall onto if you came off higher on the problem, so make sure you have a pad over it and someone to steady you if you fall. Also, the small right hand starting flake seems a little fragile, so just be aware you could fall left suddenly if it snaps. There are other potential holds for a right hand start that seem less fragile, but they would be harder as well.


Tanner Wixom
Tanner Wixom   SoCal
Just adding some lower level problems the current guide doesn't include. If you know the real name, just let me know and I'll change it. Oct 24, 2016