Adventure Projects is hiring a web engineer to join us in Boulder, CO
Mountain Project Logo

Routes in Point Dume

Arete TR 5.6 4c 14 V 12 S 4b
Center TR 5.8 5b 16 VI- 15 HVS 4c
Easy Boulder V-easy 3
Left TR 5.8 5b 16 VI- 15 HVS 4c
Left Center TR 5.8 5b 16 VI- 15 HVS 4c
Left Flake TR 5.7+ 5a 15 V+ 13 MVS 4b
Rhein-Dance TR 5.8- 5b 16 VI- 14 VS 4c
Right Center TR 5.7 5a 15 V+ 13 MVS 4b
South Face Left TR 5.10b 6a+ 19 VII- 19 E2 5b
South Face Right S 5.10b 6a+ 19 VII- 19 E2 5b
Order Wrong? Sort Routes
Type: TR, 90 ft
FA: unknown
Page Views: 3,072 total · 43/month
Shared By: Nick Mudd on Nov 5, 2012
Admins: jt512, M. Morley, Adam Stackhouse, Salamanizer suchoski, Justin Johnsen, Vicki Schwantes

You & This Route


14 Opinions

Your To-Do List:

Add To-Do · View List

Your Star Rating:


     Clear Rating

Your Difficulty Rating:


-none- Change

Your Ticks:

Add New Tick
    -none-
Access Issue: Please stay on main trail when setting top ropes Details

Description

Start at the base of the flake all the way to the left where the beach meets the hillside. Follow the flake up and to the right until it ends. The crux is the last move on the flake, maybe 5.8. Then traverse right for a few feet and follow the regular Left Route up to the two anchor bolts below the big ledge just below the top. Then traverse right on friction and crimps just below the ledge until you are underneath the toprope anchor. Then up and over the ledge to the top!

5.9 variation: instead of traversing right after the flake head straight up until you hit the ledge. This way doesn't see much traffic and is a little mossy and/or sandy.

Location

On the far left of the beach side cliff.

Protection

Top rope above the Center/Left Routes. If you want you can run it through the anchor bolts above the Left route to reduce the pendulum if you fall, but it's not really that bad because of the positive slope of the cliff--if you do fall off it's pretty easy to stop yourself from swinging.

Photos

Ganski  
So is there only one TR protection for all these routes? Dec 4, 2015

More About Left Flake

Printer-Friendly