Assembly Boulder Climbing
| Elevation: | 4,125 ft | 1,257 m |
| GPS: |
34.01592, -116.17843 Google Map · Climbing Area Map |
|
| Page Views: | 171 total · 6/month | |
| Shared By: | Sierra Knott on Feb 6, 2024 | |
| Admins: | Greg Opland, C Miller, Gunkswest, Mike Morley, Adam Stackhouse, Salamanizer Ski, Justin Johnsen, Vicki Schwantes |
1. Vegetation is not allowed to be used as an anchor.
2. Only neutral or rock-colored bolt hangers are allowed. A permit is required to replace or add new bolts: nps.gov/jotr/planyourvisit/…
Seasonal Closures:
The presence of a nesting owl in very close proximity to a variety of climbing routes, "Right On," "Orange Flake," "Kid Caligula," requires closure until the nest has been abandoned to ensure the protection of the species for the duration of the nesting activities. This closure will be in effect from February 17, 2026 until June 7, 2026; or until the nest has been abandoned.
The presence of a prairie falcon nesting in very close proximity to a variety of climbing routes requires closure of "Fat Freddie’s Cat,” “Freak Brothers Dome,” “The Weenie,” “Pea Brain,” and “The Red Obelisk." This closure will be in effect from February 17, 2026 until June 7, 2026; or until the nest has been abandoned
For a complete list of climbing rules and closures visit: nps.gov/jotr/planyourvisit/…
Description
Good climbing on good rock, except for some of the top out which will clean up with more traffic.
Getting There
Park at the end of the Lost Horse Road right before the gate. Walk straight through the gate down the road and head straight towards the cluster to the west. You can find Assembly Line in the cluster on east side of the hill with the climb facing north. It’s north west of Side Story V5 just below. You’ll need to pass a stand alone mini cluster of highballs on your way to Assembly Line.
Weather Averages
|
High
|
Low
|
|
Precip
|
Days w Precip
|
| J | F | M | A | M | J | J | A | S | O | N | D |
| J | F | M | A | M | J | J | A | S | O | N | D |
Photos
All Photos Within Assembly Boulder
Most Popular · Newest · RandomMore About Assembly Boulder
Printer-FriendlyWhat's New



0 Comments