Half Dome's Snake Dike is being retrobolted - get involved!
|
|
My opinion copied over from the Fallen thread: |
|
|
If you did this, I will never ever buy anything from you again, and will go out of my way to tell others that they oughta do the same. Tens of thousands of people have climbed the route without a problem, and now you’ve robbed every future climber of the reward that comes from having to overcome fear and risk that is inherent in climbing. A good old tar and feathering ought to be in order, but I digress. I’m not one to want to deter someone from making a living but you’ve gone too far. |
|
|
Tony Danza wrote: Agreed, you’re tremendously out of line here Eric and I’m afraid you’ve grossly overestimated your authority in the Valley scene. I can personally guarantee these bolts will be removed and would recommend no further action as your time will be wasted and hardware not returned. |
|
|
Tanner James wrote: Tanner (or others), can you speak to how Direct White Flake was bolted and not chopped? I don't know the history. The concept seems pretty parallel to putting in a new bolted direct start to Snake Dike which does not interfere with the original start. It makes sense to me to put in an alternate bolted start that avoids a potential long groundfall before the first piece on Snake Dike, especially given the logistics of rescue at this location. I'm speaking just to the starting moves here, not retrobolting the whole route. |
|
|
L Kap wrote: The old (1/4") bolts were replaced in 2004 (prior to the existence of ASCA) with 3/8" and sometimes a 5/16" at a belay. They are all fine. http://www.supertopo.com/climbers-forum/879277/safe-bolts-on-snake-dike There is even a 2009 post by Eric Beck on the second page of this thread, where he said he climbed the route with his wife a few years prior, and "The climb goes very quickly. The bolts are fine." |
|
|
Snake Dike the way it was (before slip-lasted shoes and sticky rubber) and should be. It doesn't have to be for everyone. There are plenty of routes for all as it is. |
|
|
Do you need money from others to pay for all the fines you got while causing destruction near swan slab? Also instead of retro-bolting classic climbs done by thousands, you should focus on proofreading and editing your books better. |
|
|
Could someone maybe go take a lap on Snake Dike and report on what has actually been done so far? Erik, with a K!, has reported 3 pitches of ???? completed. I have stated elsewhere that I personally don’t have a problem with some reduction in the runouts. Partly because of the early history, and later statements by Eric (with a C) Beck, and my personal view of how this particular climb fits in the world of climbing. So I wonder what actually has been done, which might indicate what more there is to come. Or maybe Erik, with a K, would be willing to provide an accurate report on pitch 2 and 3, and what his intentions are for the rest of the route. I also don’t really have a problem with current locals just erasing his work. I understand. But I am kinda looking for middle ground. If I was in the Valley, Snake Dike would be on my to do TOMORROW list. But I am not, and not gonna be close by for at least a couple weeks. |
|
|
Clint Cummins wrote: Clint, thanks for that information. I'm not a Yosemite local and may have made some assumptions about the need for bolt replacement. I didn't examine the bolts carefully the last time I was on the route, though I recall my partner remarking about rust. I bow to local knowledge of course. But if someone is going up there with rebolting energy and tools, and those bolts are from 2004, 22 years out is a good time to be upgrading anything that doesn't meet current standards. Bolts that were in use at that time were of varying quality. Here in the Colorado front range, we're replacing substandard bolts of any vintage. Do we know if the Snake Dike bolts are all stainless or plated? 5-piece or wedge? The more corroded the bolts get, the harder they are to remove. https://safeclimbing.org/new-anchor-guidelines |
|
|
L Kap wrote:
I found one somewhat poor photo from 2010 when I climbed it with Roger Brown (fixing ropes for his bolt replacement on Autobahn). The belay bolts were 3/8" 5-piece, carbon steel. So a little surface rust at that time, 6 years out. In my experience, on a mostly dry granite slab, this is cosmetic surface rust, and these are good for some decades. Although, yes, these are often replaced these days. But see the updated info and photo from Bob Steed and Dan Merrick in their later posts: All the belay bolts had been upgraded to stainless as of early 2026. Just a few non-stainless protection bolts remained. |
|
|
Clint Cummins wrote:
Clint, that is a fantastic photo! Also, where can I donate money to the person who will professionally pull and patch Erik Sloan's new bolts? |
|
|
L Kap wrote: Do we know if the Snake Dike bolts are all stainless or plated? 5-piece or wedge? The more corroded the bolts get, the harder they are to remove. https://safeclimbing.org/new-anchor-guidelines As of about 3 weeks ago, most of the belay bolts were 3/8" stainless 5-piece bolts with stainless steel hangers. The lead bolts were 3/8" carbon steel sleeve bolts with stainless steel SMC hangers. The lead bolts were rusty, but I was not too worried about them. No 1/4" bolts remain on the route. There was actually a plan in place to replace the 7 carbon steel sleeve lead bolts with stainless 3/8" 5-piece bolts with modern stainless steel Fixe hangers at the end of summer... This plan was hatched before Erik decided to put himself in the news again. Due to the historical significance of this route, the plan included making every effort to replace in the same hole, including bringing 1/2" hardware in off chance that a hole needed to be widened to make a good bolt placement. Here are a couple of photos of the bolts I clipped on Snake Dike a little over three weeks ago. These are among the 7 bolts due to be replaced. |
|
|
Hey Erik, I climbed the Bachar-Yerian a couple years ago and thought it was very dangerous. Too bad 5.11 climbers can’t safely enjoy those beautiful knobs! You should do that next! |
|
|
Beck only wanted a few bolts added, not a full grid bolting. Erick, by grid bolting a historic line like Snake Dike beyond the creator’s modest request, you are replacing a legendary, character building adventure with a sterile sport climb that can be found in any modern canyon or indoor gym. This over sanitization robs future generations of the chance to safely test their mental fortitude on an iconic piece of history, while simultaneously insulting the skills of those who worked for years to mentally prepare for the route in its authentic form. True inclusivity means mentoring others to raise their capabilities to meet the challenge of the mountain, not permanently lowering the mountain to match a lack of preparation. Adding additional bolts in line with Becks request is one thing, taking it upon yourself to add as many bolts as "you" feel necessary is another. |
|
|
Salamanizer Ski wrote: This… ^^^ |
|
|
bob steed wrote: Bob, I would like to donate to those folks who are doing this work, whether it's hardware, or money for their time and effort. If they're receptive to this, send me a private message through Mountain Project. |
|
|
Erik Sloan is the type of person who acts like he owns the rock and that his vision for it is the only way it should be. He evades rational debate or even acknowledging any points he disagrees with. He is dogmatic, unreasonable, and should not be trusted with these decisions even if he means well and does a few nice things for the community. He should really step down from his self-appointed position and let more reasonable people figure out this (kinda) gray area situation. woot woot? |
|
|
I'm let down there was no woot woot What The actual F is the world coming to? |
|
|
Erik has never been one to pay any heed to criticism. I learned to just avoid him, and thoughts of him. Wrestling with a pig in shit sorta deal. He sure has a punchable face though. I hope people aren't actually sending him money to continue his atrocities. |
|
|
I was excited to climb Snake Dike one day, though a bit nervous based on the route finding errors others have had in the run out. If it is bolted like a sport climb, I’m no longer excited to climb it. It feels like I’ll never actually get to climb Snake Dike. |









