All Locations > Colorado > Independence Pass > Wild Ridge Area > Wave

Gettin' Barreled

Name: Gettin' Barreled
Rating: 3.5

5.10+ YDS 6b+ French 21 Ewbanks VII+ UIAA 20 ZA E3 5b British

Early Access

A topo that moves with you

Zoom into every pitch before you rack up.

Try Interactive Topos

Routes in The Wave

L › R R › L A › Z

	Blue Horizon S 5.8 5b 16 VI- 15 HVS 4c PG13
	Gettin' Barreled T 5.10+ 6b+ 21 VII+ 20 E3 5b
	Held Under T 5.10b 6a+ 19 VII- 19 E2 5b
	Inside Job T 5.10a 6a 18 VI+ 18 E1 5a
	Oil Slick T 5.9+ 5c 17 VI 17 E1 5a
	Original Line T 5.9 5c 17 VI 17 HVS 5a PG13
	Surfing in a Snowstorm S 5.6 4c 14 V 12 S 4b

Order Wrong? Sort Routes

Type:	Trad, Alpine, 180 ft (55 m), 3 pitches
GPS:	39.12992, -106.67446
FA:	Todd Reeves; Randy Levensaler, Sept. 1, 2019
Page Views:	906 total · 9/month
Shared By:	Todd Reeves on Oct 8, 2018
Admins:	Alvaro Arnal, Leo Paik, John McNamee, Frances Fierst, Monty, Monomaniac, Tyler KC Page Updates (admin only)

You & This Route

4 Opinions

Your To-Do List: ·

Your Star Rating:
Rating

Your Difficulty Rating:
-none- Change

Your Ticks:Add New Tick

-none-

Explore this route in 3D

Use onX Backcountry to explore the terrain in 3D, view recent satellite imagery, and more. Now available in onX Backcountry Mobile apps! For more information see this post.

Description

P1. 5.10+. Climb moderate terrain passing two bolts up to small tree that you pass on the right side. Continue up a left-leaning crack below the roof to a protection bolt. Exit the roof on the right on tips size gear or via a face climbing variation and pull through the overlap. Continue out a finger crack and pull up onto a rail (yellow C3). Clip a traversing bolt as you reach right for the finishing finger crack of (Held Under) to the bolted anchor.

P2. 5.8. Face climb past 2 bolts and an optional #2 Camalot placement to a fixed anchor. Two raps with a 60m rope to the ground or continue through the Rip Rap on P3.

P3. 5.8. Notice the steeper, left-leaning crack above. Climb up and right, and stem into the crack. At the top place solid gear in the left crack before moving right. Be careful with a standing block at the top in the right hand crack. Finish at a fixed anchor.