Mountain Project Logo

Rope Solo Forum

Zander Göpfert · · Boulder County, CO · Joined Jun 2016 · Points: 229
Clay Thomaswrote:

Thanks Zander this is great to hear!

I'll briefly re-iterate that in my opinion, it would really be best to have separate forums for TRS and LRS, due to vast differences in the relevant techniques, the population of interested climbers, and the room for sensible experimentation. 

Thanks again!

Thanks, Clay. Understood. That'll have to wait for a later round of improvements but I've got it documented. 

Mike Larson · · Los Angeles, CA · Joined May 2006 · Points: 70
Zander Göpfertwrote:

Thanks, Clay. Understood. That'll have to wait for a later round of improvements but I've got it documented. 

Let's not look a gift horse in the mouth. One forum is more than enough, Zander. TRS techniques aren't complicated enough to warrant their own (though the FB TRS group does its best to try).

Kevin, I'll make a video. I've had a ton of people asking me the particulars so I'll post it here and on the FB LRS group.

mountainhick · · Black Hawk, Franktown, CO · Joined Mar 2009 · Points: 120
Mike Larsonwrote:

Let's not look a gift horse in the mouth. One forum is more than enough, Zander. TRS techniques aren't complicated enough to warrant their own (though the FB TRS group does its best to try).

Kevin, I'll make a video. I've had a ton of people asking me the particulars so I'll post it here and on the FB LRS group.

Agree. There's plenty of room for LRS and TRS on one sub-forum.

Thank you Zander!

Clay Thomas · · Troy, NY · Joined Mar 2016 · Points: 347

Volume-of-posting-wise, I agree that one forum is enough -- I was thinking more for clarity of topic and ease of filtering by interest. 

That being said, one mega rope solo forum here will be awesome to have, thanks all!

Rope Byrne · · Colorado Springs · Joined May 2015 · Points: 190
Mike Larsonwrote:

Kevin, have you tried the Freebell with an armpit mount? It radically changed my opinion of the device. 

I find it more hassle than it's worth mounted on the harness because so much energy is wasted pulling cache -- both because of the friction of the device but also because the throw length is so low. With the FB attached to a double-length sling bandoliered over my shoulder and attached via the swage hole with cotton string, I was able to improve the efficiency of the device by 10x and didn't have to go ham with a saw and grinder like Rogers did. Now it's not only extremely easy to pull cache, it's also easy to monitor how much is out since it's less likely to get obscured in the harness jumble. I'm far less likely to short-rope myself now.

I like the idea, but I'm still not sure about attachment. I guess some thin string will thread through that tiny hole, but how do you attach that to the sling? In my attempt, I noticed that as soon as I start adding attachment devices like carabiner/etc, it make the device hang lower and lower with each new device. Ideally, you'd want the freebell at the same level as the doubled sling, but I was kind of stuck trying to figure out how to attach it that high.

Mike Larson · · Los Angeles, CA · Joined May 2006 · Points: 70

Kevin and Rope, finally made that video I kept promising and putting off. Hopefully it explains the setup well enough to replicate. If you got any questions let me know.



Kevin Stricker · · Evergreen, CO · Joined Oct 2002 · Points: 1,341

Mike,

  Thanks for the video!  I will play with it a bit to see how it feels. Do you have any advice on length of rat tail and material?  

It’s interesting to see how different people set up their solo system. I suppose I should make a vid about my set-up one of these days.

Cheers!

Rope Byrne · · Colorado Springs · Joined May 2015 · Points: 190

Thanks Mike! That definitely answers some important questions for me.

Mike Larson · · Los Angeles, CA · Joined May 2006 · Points: 70
Kevin Strickerwrote:

Mike,

  Thanks for the video!  I will play with it a bit to see how it feels. Do you have any advice on length of rat tail and material?  

It’s interesting to see how different people set up their solo system. I suppose I should make a vid about my set-up one of these days.

Cheers!

Rogers himself made it for me for $10. It's just 4mm dyneema cord which he spliced loops on both ends. He's on the record as being happy to make one for anyone who asks so I'd just drop him a PM if you don't want to make one yourself.

Zander Göpfert · · Boulder County, CO · Joined Jun 2016 · Points: 229

Many of you have already jumped over but just in case, the new Rope Soloing forum section is live! Let me know if you see anything strange or worth tweaking, it's been a minute since we added a new forum section. Thanks!

Anthony Altemara · · Western US · Joined Sep 2014 · Points: 0
Zander Göpfertwrote:

Many of you have already jumped over but just in case, the new Rope Soloing forum section is live! Let me know if you see anything strange or worth tweaking, it's been a minute since we added a new forum section. Thanks!

Thanks!!!!

Guideline #1: Don't be a jerk.

Discuss MountainProject.com
Post a Reply to "Rope Solo Forum"

Log In to Reply
Welcome

Join the Community! It's FREE

Already have an account? Login to close this notice.