Ugly Hardware Only
|
|
|
|
|
The welded 1/2" shut was as least as strong as the bolt when they were new. Great to see you upgrade these Anna! |
|
|
This cold shut was on a single pitch anchor where one of the bolts had already been upgraded but not this second one. It was my first cold shut upgrade and it’s less “ugly” than just “older”. Time to update it so no one has to question if they’d whip or not. We replaced 8 anchors out of about 20 on this wall. Several of the anchors were washer stacks with rusted chain. |
|
|
Definitely justified in replacing that old thing Anna. Keep up the good work. Love seeing that old mank. |
|
|
|
|
|
Holy blue!!! I’ve never seen such an anchor. It’s creative, I’ll say that. Thank you, Salamanizer Ski! I don’t like manky anchors and there’s nothing I enjoy better than upgrading them. |
|
|
I am not so sure the "Holy Blue" qualifies as Ugly. For an arid location that it is acceptable to use carbon steel wear points. That portion can be upgraded with basic tools. As long as the rope does not get pinched against the rock. I wont use carbon steel here in the mid atlantic(including mussies). In many cases it will rust to shit long before it wears out. |
|
|
It was already changed to stainless chain, this was some weirdness used with a fixed line during development underneath |
|
|
Adam W wrote: Material lifting pear. Nice. |
|
|
It came from some sort of convention center rigging job. |
|
|
|
|
|
|
|
|
Great haul Ben!! |
|
|
Great job everyone, all these photos are inspiring me to go back out and collect some more mank. |
|
|
|
|
|
Some classic late 90s/early 00s stainless hanger/plated bolt corrosion And a little before/after on the same route. Never seen these Trango hangers in the wild before |
|
|
Anna Brown wrote: Am I missing some reference? Isn’t this considered totally bomber and far from need of replacement? |
|
|
Mikey Schaefer wrote: Maybe the tangle of carbon steel chain is what Anna was focused on. |
|
|
Mikey, I had an extra new mussy with me at the wall so we replaced this one since it was clearly heavily worn. To me, the challenge with worn lowering hardware is some climbers see a worn groove and report the hardware as ready for replacement. The mussy in the photo was on a popular route but it was less worn than the one I was actually there to replace because of a report. Since there isn't a formal way to report worn hardware in my area (and so few people actually report it when it is worn), I'm okay replacing lowering hardware that is this worn when I have the hardware and I'm at the wall. I personally don't want to go back to check it if someone reports it again in a year and what if it's sharp in a year and it doesn't get checked?! |
|
|
Some interesting mussy hook tests from the hownot2 guys:
|













