Mountain Project Logo

Seatbelt material in anchor building

Original Post
Kevin Cottingham · · Nc · Joined Nov 2019 · Points: 70

I've got ~8 yards of seat belt material (2inch polyester webbing, 6000lbs tensile strength) laying around from a recent project. Is there any reason why I shouldn't use the extra webbing in building anchors or other general climbing purposes? 

Sam Skovgaard · · Port Angeles, WA · Joined Oct 2017 · Points: 208

You could make a sweet swami belt

DrRockso RRG · · Red River Gorge, KY · Joined Sep 2013 · Points: 1,220

Bulky, slippery and wide for knots, if left as tat subsequent people will be sketched out. 

Jeff Luton · · It's complicated · Joined Aug 2016 · Points: 5

Yeah go for it

FrankPS · · Atascadero, CA · Joined Nov 2009 · Points: 276

Great idea. And if you have some spare airbags lying around, you could use them as crash pads. So creative!

Zacks · · Unknown Hometown · Joined Apr 2015 · Points: 65

Only thing I can imagine is how they cut.  Those seatbelts cutters seem to start a cut and then they just rip I wonder if they are designed to be cut easily so EMS can get people out.  If that's the case a small nick could cause that leg of the anchor to fail.

I dont know I have no hard data to support that.  Maybe webbing cuts just as easy

Also webbing is like $0.35 per foot so you are saving like $8. 

Kevin Cottingham · · Nc · Joined Nov 2019 · Points: 70
Zacks wrote: Only thing I can imagine is how they cut.  Those seatbelts cutters seem to start a cut and then they just rip I wonder if they are designed to be cut easily so EMS can get people out.  If that's the case a small nick could cause that leg of the anchor to fail.

I dont know I have no hard data to support that.  Maybe webbing cuts just as easy

Also webbing is like $0.35 per foot so you are saving like $8. 

I didn't even think about how well they cut, that's a good point. I don't know how well regular webbing cuts either though. 


I wasn't necessarily trying to avoid buying webbing, I just know the seatbelt roll will sit on a shelf for 4 years while I wait for some other project that needs it (there probably won't be one) before I finally just throw it away. 

Darren Mabe · · Unknown Hometown · Joined Dec 2002 · Points: 3,669

Da fuk?!

John Reeve · · Durango, CO · Joined Nov 2018 · Points: 15

"I wasn't necessarily trying to avoid buying webbing, I just know the seatbelt roll will sit on a shelf for 4 years while I wait for some other project that needs it (there probably won't be one) before I finally just throw it away. "

Put that shit on craigslist or FB marketplace.

Marc-Olivier Chabot · · Gatineau, QC · Joined Sep 2016 · Points: 440

Hi Kevin. A car seatbelt is stronger than the UIAA requirement of 22 kN. I have tons of chord, rope, sling, and webbing but I have still used 2 times a car seatbelt on a tree at top of a route. To me it's bombproof. Any nylon, Dyneema or kevlar are easy to cut with a sharp knife, especially under load, climbing rope included.

Guideline #1: Don't be a jerk.

Climbing Gear Discussion
Post a Reply to "Seatbelt material in anchor building"

Log In to Reply
Welcome

Join the Community! It's FREE

Already have an account? Login to close this notice.