|
|
odd rune
·
Feb 24, 2020
·
Trondheim, NO
· Joined Jul 2017
· Points: 0
Hi,
I didn't want to necro the old thread with almost the same title, so I'm making a new one, apologies if that's Bad Form.
One of my tech machines have developed an annoying little wobble in the head and I was wondering if anyone else have experienced similar, and how you dealt with it?
I tried to slobber on a bit of epoxy in the hope making the problem less pronounced, but didn't work so well...
It's messing with my head a littlebit, I don't like the feel of a sinker placement that wobbles...
I've contacted grivel, but until i hear back from them I thought I'd just give you guys something to talk about :-)
|
|
|
ratherbefishing
·
Feb 24, 2020
·
Unknown Hometown
· Joined Jan 2015
· Points: 50
Grivel had this issue with some of their older tools, in particularly the ones that had a rivet and then a split pin. The split pin, with use, can come loose. The tools look similar to this one: weighmyrack.com/IceTool/Gri… The newer models have a dogbone shaped shaft and 2 rivets, which is supposed to solve that problem.
If your tools have the split pin you can alleviate the problem by mushrooming the pin. The best way I found to do this is by using a large ish (1/4" or 5mm diameter) centre punch held in a vice. You may need help to do this, but hold the tool with the split pin centred over the punch in the vice. With another centre punch, hit the other side of the pin to swell it out. This should help, though it won't solve the problem in the long term. They eventually wobble again.
by the by, Grivel warrantied the tools for me after I got in contact with them. In North America you have to contact Liberty Mountain who were really great to deal with. I'm guessing you can get in touch with Grivel home base if you're in Norway???
|
|
|
Nick Goldsmith
·
Feb 24, 2020
·
NEK
· Joined Aug 2009
· Points: 510
Friend of mine had the head of his old grivel machine come right off leading WI6 in the Canadian rockies….
|
|
|
odd rune
·
Feb 25, 2020
·
Trondheim, NO
· Joined Jul 2017
· Points: 0
ratherbefishing wrote: Grivel had this issue with some of their older tools, in particularly the ones that had a rivet and then a split pin. The split pin, with use, can come loose. The tools look similar to this one: weighmyrack.com/IceTool/Gri… The newer models have a dogbone shaped shaft and 2 rivets, which is supposed to solve that problem.
If your tools have the split pin you can alleviate the problem by mushrooming the pin. The best way I found to do this is by using a large ish (1/4" or 5mm diameter) centre punch held in a vice. You may need help to do this, but hold the tool with the split pin centred over the punch in the vice. With another centre punch, hit the other side of the pin to swell it out. This should help, though it won't solve the problem in the long term. They eventually wobble again.
by the by, Grivel warrantied the tools for me after I got in contact with them. In North America you have to contact Liberty Mountain who were really great to deal with. I'm guessing you can get in touch with Grivel home base if you're in Norway???
Thank you for the advice!
I have the single rivet version which I bought somewhere around 2016. They have seen a lot of use, but I was hoping they would hold out for slightly longer. I have contacted grivel's head office via email, but i don't have the receipt anymore so I'm guessing they are gonna say 'tough luck buddy'.
I wonder if it's possible to drill out the rivet, take out the head, fill it with epoxy and then just use a bolt and nut to fix the head? How does that plan sound to you?
|
|
|
odd rune
·
Feb 25, 2020
·
Trondheim, NO
· Joined Jul 2017
· Points: 0
Nick Goldsmith wrote: Friend of mine had the head of his old grivel machine come right off leading WI6 in the Canadian rockies…. This is what worries me.
|
|
|
Nick Goldsmith
·
Feb 25, 2020
·
NEK
· Joined Aug 2009
· Points: 510
he is a total bad ass who solos 5+ routinely so he changes out tools every three years now. I try to not go more than two seasons on crampons and keep a sharp eye on the tools. My x dreams were headed into their 6th season this year and one of the rivets looked funny. no wobble but the rivet looked like it had moved a tiny bit. I bit the bullet and bought new tools. If you have an obvious wobble I would defiantly try to get grivel to warrantee it.
|
|
|
ratherbefishing
·
Feb 26, 2020
·
Unknown Hometown
· Joined Jan 2015
· Points: 50
odd rune wrote: Thank you for the advice!
I have the single rivet version which I bought somewhere around 2016. They have seen a lot of use, but I was hoping they would hold out for slightly longer. I have contacted grivel's head office via email, but i don't have the receipt anymore so I'm guessing they are gonna say 'tough luck buddy'.
I wonder if it's possible to drill out the rivet, take out the head, fill it with epoxy and then just use a bolt and nut to fix the head? How does that plan sound to you? Hello again! does your tool look like the one in the link I posted, above? If so, it may be a better option to drill the spring pin out and add another rivet.
Adding epoxy may be an ok option, too. I would suggest getting really good epoxy and strengthening it by adding chopped fibres of some kind (you can usually get fibreglass and carbon chopped fibre to add to resin). Reason to use good epoxy with some fibre in it: 1) epoxy is just a polymer. Some are pretty soft even when hard, so adding this to your shaft, which is likely already deforming, may not resolve your problem for very long. 2) Adding fibre gives the epoxy more strength and gap filling capability.
I didn't have a receipt and wasn't asked for one though I'm not certain if this is a norm. Grivel stood behind their gear. It's too bad the tools broke, but I'm happy that they warrantied them! Hopefully they take care of you.
|
|
|
odd rune
·
Feb 27, 2020
·
Trondheim, NO
· Joined Jul 2017
· Points: 0
ratherbefishing wrote: Hello again! does your tool look like the one in the link I posted, above? If so, it may be a better option to drill the spring pin out and add another rivet.
Adding epoxy may be an ok option, too. I would suggest getting really good epoxy and strengthening it by adding chopped fibres of some kind (you can usually get fibreglass and carbon chopped fibre to add to resin). Reason to use good epoxy with some fibre in it: 1) epoxy is just a polymer. Some are pretty soft even when hard, so adding this to your shaft, which is likely already deforming, may not resolve your problem for very long. 2) Adding fibre gives the epoxy more strength and gap filling capability.
I didn't have a receipt and wasn't asked for one though I'm not certain if this is a norm. Grivel stood behind their gear. It's too bad the tools broke, but I'm happy that they warrantied them! Hopefully they take care of you.
They did take care of me!
Or rather, the local importer came through and offered me a set of demo tools while they sent mine back to grivel (he said they replace the current rivet, and add a second). I haven't heard back from Grivel head office after I contacted them, but he said the tools generally end up at their table anyway :-)
Thanks for the useful suggestions anyway, I'll keep them stored away in case i need to do in-field work.
|
|
|
ratherbefishing
·
Feb 27, 2020
·
Unknown Hometown
· Joined Jan 2015
· Points: 50
odd rune wrote: They did take care of me!
Or rather, the local importer came through and offered me a set of demo tools while they sent mine back to grivel (he said they replace the current rivet, and add a second). I haven't heard back from Grivel head office after I contacted them, but he said the tools generally end up at their table anyway :-)
Thanks for the useful suggestions anyway, I'll keep them stored away in case i need to do in-field work.
good to hear! It's good to hear that the company and those associated take care of their customers.
|