All Locations >
California
> Joshua Tree NP
> Joshua Tree Bou…
> Hidden Valley A…
> Outback Bouldering
> Chuckawalla Boulder
Flintlock Dyno
V0 YDS 4 Font
Avg: 2 from 176 votes
Type: | Boulder, 10 ft (3 m) |
FA: | unknown |
Page Views: | 2,391 total · 10/month |
Shared By: | C Miller on Dec 31, 2004 |
Admins: | Greg Opland, C Miller, Gunkswest, Mike Morley, Adam Stackhouse, Salamanizer Ski, Justin Johnsen, Vicki Schwantes |
Your To-Do List:
Add To-Do ·
Use onX Backcountry to explore the terrain in 3D, view recent satellite imagery, and more. Now available in onX Backcountry Mobile apps! For more information see this post.
Access Issue: Climbing Regulations/Seasonal Raptor Closures
Details
The Joshua Tree National Park Superintendent's Compendium states that:
1. Vegetation is not allowed to be used as an anchor.
2. Only neutral or rock colored bolt hangers are allowed.
For a complete list of climbing rules and closures visit:
nps.gov/jotr/planyourvisit/…
1. Vegetation is not allowed to be used as an anchor.
2. Only neutral or rock colored bolt hangers are allowed.
For a complete list of climbing rules and closures visit:
nps.gov/jotr/planyourvisit/…
Description
This short but fun dyno/reach problem is located just right of Chuckawalla (V1) on the far right side of the Chuckawalla Boulder.
This somewhat height-dependent problem starts with both hands matched on a large flat rail and involves a dyno or long reach to the incut jugs at the lip - kinda like going for the top of a fence. An easy descent exists off the northeast corner of the boulder.
A fun variation (V1) to this problem it to SDS with hands matched on the large flake/jug just to the left and work up to the rail and then work up small edges before grabbing the lip.
This somewhat height-dependent problem starts with both hands matched on a large flat rail and involves a dyno or long reach to the incut jugs at the lip - kinda like going for the top of a fence. An easy descent exists off the northeast corner of the boulder.
A fun variation (V1) to this problem it to SDS with hands matched on the large flake/jug just to the left and work up to the rail and then work up small edges before grabbing the lip.
4 Comments