Type: Sport, 400 ft (121 m), 4 pitches, Grade II
GPS: 47.58762, -121.4677
FA: unknown
Page Views: 471 total · 277/month
Shared By: Jacob Fugman on Sep 14, 2026 · Updates
Admins: Jon Nelson, Zachary Winters, Mitchell McAuslan

You & This Route


4 Opinions
Your To-Do List: Add To-Do ·
Your Star Rating:
Rating Rating Rating Rating Rating      Clear Rating
Your Difficulty Rating:
-none- Change
Your Ticks:Add New Tick
-none-
Use onX Backcountry to explore the terrain in 3D, view recent satellite imagery, and more. Now available in onX Backcountry Mobile apps! For more information see this post.

Description Suggest change

Rusty Button gets it's name from an old button head bolt from some of the original hardware found near the start of the climb. The route has fresh hardware and follows a featured granite slab on the west side of Otter Falls. All belay stances except the last will have horizontally oriented bolts with quick-links and rings for use if a party needs to bail. The route has a separate rappel line that follows vertical chain anchors. 

Pitch 1: 5.10a - 16 Bolts, 40m

- Look for first bolt and start directly below on the slab with nubs. The route snakes right before traversing left; this is the crux pitch. After the traverse, the route continues straight up a slab and then follows a ramp up and left. Rope drag will happen on this pitch so having a few alpine draws will help. 

Pitch 2: 5.9 - 10 bolts, 30m

- Follow the flake and go around the corner or step up onto the slab if you don't want a runout.

Pitch 3: 5.7 - 5 bolts, 30m

- Follow bolts up featured slab.

Pitch 4: 5.6 - 5 bolts, 30m

- Traverse right before going up to the belay anchor. Look for a vertical chain anchor at a good stance. This is the style of anchor to follow for the descent.  

Descent 

- Follow vertical chain anchors back to the base of the climb. There are 4 rappels to get back to the start of the climb. 60m ropes will reach each of the rappel stations. TIE KNOTS IN THE ENDS OF YOUR ROPE!

Bailing Options

- At any point of the climb, you can either descend back to the previous belay stance or swing right to access a rappel station. 

Location Suggest change

To get to the climb, you'll need to do some bushwhacking. Start by following the Taylor River Trail to Lipsy Lake and Otter Falls. Once at the lake, cross the stream on the south side of the lake. Continue along the south shore of the lake and look for an opening in some slide alder. Enter the woods through an opening in the brush and scramble up a steep hillside. Continue up the hillside until you crest a plateau. From here head towards the rock slabs by continuing up hill through the trees.     

Protection Suggest change

Bolts

Photos

0 Comments