Avg: 1 from 1 vote
|Type:||TR, 30 ft (9 m)|
|Page Views:||295 total · 10/month|
|Shared By:||kenr on Jul 21, 2019|
|Admins:||Aron Quiter, Euan Cameron, AWinters, Mike Morley, Adam Stackhouse, Vicki Schwantes, Justin Johnsen|
Start under small bush at top with branch hanging down onto wall.
Up thinner crack (just right of wider crack) to finish just left of branch hanging down.
Traversing to other top anchors: To the Left of the top anchor is a facultative bolt for aid and/or protection for reaching the top anchor of the route "Central Grooves".
warning: The rock on and near this route has not been climbed much yet, and some of the rock is still breakable and loose -- so the belayer and other people should stand far away from underneath the climber.
. . (These two bolts are 80 mm x 10 mm wedge expansion bolts, 316 Stainless steel.
. . . Upper hanger on anchor is 304 Stainless, lower hanger is round-stock 316 Stainless.
. . . Ramshorn lower-off is 316 Stainless.
. . . Chain and quick-links are Plated steel. All installed 2019).
No fixed hardware installed for intermediate lead protection as of 2019.
For details on the facultative bolt to Left of top anchor, see the route "Central Grooves".
Protection for trad leading is unknown and likely inadequate.
For ideas about how to set up Top-Roping, see the Area page for this sector.