Mountain Project Logo
To save paper & ink, use the [Hide] controls next to photos and comments so you only print what you need.

Unknown 5.8

5.8+, Trad, 40 ft (12 m),  Avg: 2.4 from 84 votes
FA: unknown
Utah > Southeast Utah > Indian Creek > Habitado
Warning Access Issue: 2024 Raptor Avoidance Areas! Limited Toilet Facilities! DetailsDrop down
Warning Access Issue: RAIN, WET ROCK and RAPTOR CLOSURES: The sandstone around Moab is fragile and is very easily damaged when it is wet. Also please ask and be aware of Raptor Closures in areas such as CAT WALL and RESERVOIR WALL in Indian Creek DetailsDrop down

Description

Climb a small left-facing corner with perfect hands.  Pass a few rests with good feet before a short bulgy crux move.  The crack pinches down near the top, but a long reach out left gets you to a jug.

Location

Right side of the wall, about 20' left of Lightning Bolt Crack.  Look for the left-facing 1-2 foot corner.

Protection

#2's, a .75., maybe a #1.

Photos [Hide ALL Photos]

Eric Malone Leading the overhanging start of the 5.8 "The Big Lean ", Grumpyhighlander
[Hide Photo] Eric Malone Leading the overhanging start of the 5.8 "The Big Lean ", Grumpyhighlander
Anika Bach On the Last of the hard move on the unknown 5.8 "The Big Lean", Habitado Crag, Grumpyhighlander
[Hide Photo] Anika Bach On the Last of the hard move on the unknown 5.8 "The Big Lean", Habitado Crag, Grumpyhighlander
Right side of Habitado
[Hide Photo] Right side of Habitado
Right side of Habitado
[Hide Photo] Right side of Habitado
Jordan cleaning the route on rappel
[Hide Photo] Jordan cleaning the route on rappel
Great jams
[Hide Photo] Great jams
Mary-Ann's first creek lead, "The Big Lean" , Grumpyhighlander
[Hide Photo] Mary-Ann's first creek lead, "The Big Lean" , Grumpyhighlander

Comments [Hide ALL Comments]

Bill Lundeen
Fort Bragg, CA
[Hide Comment] Looks like you need to git Karl's book out so you can add some names and FA recognition! Nov 2, 2019
Greg Stark
Laramie, WY
 
[Hide Comment] A #3 would be good to have for the slightly wider bit before the top out. Apr 5, 2021