Mountain Project Logo

Routes in 3. Mytho Wall

Floch Ness Monster S 5.11a 6c 22 VII+ 22 E3 5c
Hera S 5.11b 6c 23 VIII- 23 E3 5c
Huldra S 5.11c 6c+ 24 VIII- 24 E4 6a
Hydra S 5.11c 6c+ 24 VIII- 24 E4 6a
Kraken, The S 5.12c 7b+ 27 IX- 27 E6 6b
Leviathan S 5.13a 7c+ 29 IX+ 29 E6 6c
Little Nemo S 5.12a 7a+ 25 VIII+ 25 E5 6a
Lizard Baby S 5.12b 7b 26 VIII+ 26 E5 6b
Sagertooth Tiger S 5.11b 6c 23 VIII- 23 E3 5c
Sea Sprite S 5.11d 7a 24 VIII 25 E5 6a
Shipyard Showers S 5.12a 7a+ 25 VIII+ 25 E5 6a
Siren S 5.12c 7b+ 27 IX- 27 E6 6b
Tanner's Perpetual Motion Machine S 5.12a 7a+ 25 VIII+ 25 E5 6a
Too Tall for Twomey S 5.11d 7a 24 VIII 25 E5 6a
Type: Sport, 90 ft
FA: Flaco Flores
Page Views: 110 total · 11/month
Shared By: Flaco Flores on Jun 26, 2017
Admins: Mike Snyder

You & This Route


2 Opinions

Your To-Do List:

Add To-Do · View List

Your Star Rating:


     Clear Rating

Your Difficulty Rating:


-none- Change

Your Ticks:

Add New Tick
    -none-

Description

The technical crux is at the start of the route, in between the 1st bolt and the 2nd bolt. It's a bouldery start, but goes into great hands for clipping the 2nd bolt. If you're not super comfortable with climbing 11's you might want to clip the 2nd bolt.

The second crux is an endurance crux (this route is roughly 28 meters tall). After you pull the first crux use your rest spots wisely; you will find yourself getting pumped throughout the rest of the route, which is sustained 5.10d fun!

Location

This route is one of the first routes you will see when walking up to the Shipyard. There are two very nice belay ledges below the route (Man made by stacking logs), which you will walk right next to/on when going up to the main area. The Flacness Monster is located in the dihedral.

Protection

You will need 14 draws, plus two draws for the anchors.

  • **Note, there is one permadraw on this route to help with cleaning the route. Clip into the permadraw when you're being lowered, otherwise it can be a real bearcat to clean the route.

Photos

0 Comments

More About Floch Ness Monster

Printer-Friendly