Adventure Projects is hiring a web engineer to join us in Boulder, CO
Mountain Project Logo

Routes in Ship's Prow

Black Wall S,TR 5.10a 6a 18 VI+ 18 E1 5a
Black Wall GT Ledge (Variation) TR 5.8 5b 16 VI- 15 HVS 4c
Double Chimney T,TR 5.5 4b 13 IV+ 11 MS 4a
Hot Shot T,TR 5.8- 5b 16 VI- 14 VS 4c
Jams of Joy T,TR 5.5 4b 13 IV+ 11 MS 4a
Layback Further & Relax a Bit More T 5.2 3 8 II 8 D 2c
Layback and Relax T,TR 5.5 4b 13 IV+ 11 MS 4a
Rainbow Coalition TR 5.11+ 7a 24 VIII 24 E4 6a
Reefing Points T,TR 5.5 4b 13 IV+ 11 MS 4a
Reign of Terror TR 5.9+ 5c 17 VI 17 E1 5a
Right Face T,TR 5.8+ 5b 16 VI- 15 HVS 4c R
Ship's Prow Starboard T,TR 5.4 4a 12 IV 10 VD 3c
Ship's Prow, The T,TR 5.7 5a 15 V+ 13 MVS 4b
Simple Stuff T 5.5 4b 13 IV+ 11 MS 4a
Slicer T,TR 5.8 5b 16 VI- 15 HVS 4c
Upper Black Wall TR 5.9 5c 17 VI 17 HVS 5a
W-2s T 5.7 5a 15 V+ 13 MVS 4b PG13
Wet Crack T,TR 5.8 5b 16 VI- 15 HVS 4c
White Face T,TR 5.6 4c 14 V 12 S 4b
Widest Whitest T,TR 5.7 5a 15 V+ 13 MVS 4b
Order Wrong? Sort Routes
Type: Trad, TR, 30 ft
FA: unknown
Page Views: 354 total · 12/month
Shared By: Dust Diedricksen on May 21, 2016
Admins: Joe M., Old Timer, jim.dangle

You & This Route


3 Opinions

Your To-Do List:

Add To-Do · View List

Your Star Rating:


     Clear Rating

Your Difficulty Rating:


-none- Change

Your Ticks:

Add New Tick
    -none-

Description

This ascends the obvious chimney to the right of Black Wall.

Pull through the chimney to a ledge at about 15'. Then follow a bulging crack (crux) past a small tree to the top. Perhaps there is a 5.6 move for the hand-crack crux and a bit of a reach for a good hold to pull through this sequence to the small tree. The second half of the climb isn't really a chimney.

Location

It is wedged between Black Wall and Ship's Prow face. This is hard to miss. Look for a small tree above the top crack (beyond the ledge).

Protection

This takes good gear up to 2". Hexes will work as well. Also, you can build a top rope anchor with some gear, and you can sling a cinderblock-size protrusion at top.

Photos

- No Photos -

0 Comments

More About Double Chimney

Printer-Friendly