Mountain Project Logo

Routes in Yosemite Boulder

Big Snatch V8 7B
Corner the Market V11 8A
Easier Slab V-easy 3
Easy Slab V0- 4-
Four O'Clock Fungus V7-8 7B
Glacier Polish V5 6C
Keeping Up Appearances V5 6C
Merced V7 7A+
Midnight Lichen V8 7B
Noontime Moss V1 5
Polypluker V7- 7A+
Smiling Fish, Goat on Fire V10 7C+
Straight Razor V6 7A
Whitey's Hard One V9 7C
Wide Crack V0- 4-
Y Crack V0 4
Yosemite Crack V0 4
Yosemite Highball V2 5+
Yosemite Sam V3 6A
Type: Boulder, 15 ft
FA: unknown
Page Views: 270 total, 12/month
Shared By: ckersch on Feb 28, 2016
Admins: M Sprague, Joe M.

You & This Route

1 Opinions

Your To-Do List:

Add To-Do

Your Star Rating:

     Clear Rating

Your Difficulty Rating:

-none- Change

Your Ticks:

Add New Tick


Start as for Polypucker, but instead of going up, traverse right down the diagonal crack, essentially doing Straight Razor in reverse. Finish at the finish of Midnight Lichen, either by launching straight to the good holds at the top or by using the mono and cranking to the arete.


I just used one big pad at the end, but the ground is fairly rocky so another pad for the middle wouldn't hurt.


- No Photos -
If you have to climb all the way down to the start hold of Straight Razor, it's probably more like V8. I hit the finishing jug with one hand (and a foot) on the Straight Razor start hold and one on the other good hold further along the diagonal crack, which feels a bit easier. I'll try to get a beta photo next time I'm out at the woods. Mar 7, 2016
Joe M.    
I would think this would be at least V8ish as either finishing method (Big Sucka or Midnight Lichen) are both V8 on their own. Seems like a cool problem though... Feb 29, 2016
Did this link up today. I'm tall enough to crank straight to the finish jugs on Midnight Lichen with a hand high in the diagonal crack where Straight Razor starts, so this is probably harder than V7 if you're short. I didn't use the chunky holds in the crack, but they probably won't make a difference to the grade if you want to grab them. Probably been done before? Feb 28, 2016