[Hide Comment] I bolted this route in June 2013. I climbed Infra-red and saw the line out to the left and came back the next week and bolted it ground up on lead and on site. We rated it 10a, it felt pretty pumpy to me but I was hanging out drilling off 1 arm and my friend whipped on the second ascent. But it's mellower than that at like 5.8/5.9. Nov 1, 2018

[Hide Comment] 2 spinner bolts, nuts were unscrewing by hand. I snugged one up with a wrench, didn't wanna tighten it too much. The second spun the bolt in the hole before the nut really got snug. Climb the route next to it and hang a top rope. Jun 29, 2019

[Hide Comment] 2nd and 4th bolt spinning and both anchors are loose. Jul 10, 2020

[Hide Comment] Multiple spinners and loose anchor bolts spinning in their holes after only eight years. Time for the FA to make some repairs to this death trap. Easily made the ten year statute of limitations. Dec 27, 2021

[Hide Comment] Went to get on this one and the first one of us up the route found the second bolt way too loose to trust. We didn't get as far as checking the fourth one to see if it's sill loose, too. Jul 19, 2022

[Hide Comment] Overheard at the crag: "If I had pliers I could pull this bolt straight out." Second bolt spins, not the nut but the actual bolt within the hole. Fourth hanger seems to have been removed from its bolt, presumably because it couldn't be tightened, or simply fell off. Anchors wiggle a little but the bolts seem solid. Just do Infra-Red. Sep 5, 2022

[Hide Comment] Hand tightened bolt 2 (think bolt might be spinning) and bolt 4 didn't even have a hanger. Oct 1, 2022

[Hide Comment] Bolts 2 and 4 have been replaced Oct 31, 2022