Mountain Project Logo

Routes in The ZoZone

Berzerk S 5.10d 6b+ 21 VII+ 21 E3 5b
Beware the Foosa S 5.7 5a 15 V+ 13 MVS 4b
Doodles S 5.6 4c 14 V 12 S 4b
Dutch Rudder S 5.12a 7a+ 25 VIII+ 25 E5 6a
Frogger S 5.8 5b 16 VI- 15 HVS 4c
Put Down Your Ducky S 5.8 5b 16 VI- 15 HVS 4c
Zozo's Dance S 5.7 5a 15 V+ 13 MVS 4b
Order Wrong? Sort Routes
Type: Sport, 50 ft
FA: Jeremy Rowan
Page Views: 174 total · 5/month
Shared By: Sam Lightner, Jr. on Nov 9, 2015
Admins: Lauren Heerschap, Mike Snyder, Jake Dickerson, Taylor Spiegelberg

You & This Route


4 Opinions

Your To-Do List:

Add To-Do · View List

Your Star Rating:


     Clear Rating

Your Difficulty Rating:


-none- Change

Your Ticks:

Add New Tick
    -none-
Access Issue: Dogs Details

Description

About 20 feet right(climber's right) of Put Down Your Ducky (5.8) is this short bouldery route. Climb the bulge/shield feature on excellent rock using sidepulls, underclings and crimps. I recommend pre-hanging as many draw as you can, especially on the second hangar as some may find it a bit difficult to clip. Really fun sequence up to the fourth bolt and then cruiser jugs on less than vertical terrain past the fifth and final bolt and on to the anchors.

Location

Dutch Rudder is located on climber's right from Put Down Your Ducky on Sink's Main Wall. These two routes are just up canyon from all of the moderates located to the left of Killer Cave. The next route to the right from Rudder is Global Warm-up.

Protection

Quickdraws. Five(5) bolts and a set of Fixed ring anchors.

Photos

- No Photos -
Beau Skelton 1
Billings, MT
  5.12-
Beau Skelton 1   Billings, MT
  5.12-
pulling the bulge at the bottom makes this route worth doing but definitely among the lesser quality 12a's in the canyon.

some balance moves from the bottom to a bouldery move on poor feet above bolt 1. more insecure feet and decent pockets/side pulls get you to bolt 3. make it past this and enjoy chossy 5.7 climbing to the anchors.

short, hard to grade but worth it for the boulder problem at the bottom Jun 5, 2018

More About Dutch Rudder

Printer-Friendly