Mountain Project Logo

Routes in g. The Righteous and the Wicked Sector

18 and Life S 5.9 5c 17 VI 17 HVS 5a
19’s In The House S 5.10a 6a 18 VI+ 18 E1 5a
AF in PA S 5.9+ 5c 17 VI 17 E1 5a
Avant Garden S 5.9- 5c 17 VI 16 HVS 4c
Both Ends Burning S 5.10d 6b+ 21 VII+ 21 E3 5b
Both Ends Burning Variation S 5.10a 6a 18 VI+ 18 E1 5a
Final Cut S 5.11c 6c+ 24 VIII- 24 E4 6a
Marriage by Napster S 5.9 5c 17 VI 17 HVS 5a R
Righteous and the Wicked, The S 5.11a 6c 22 VII+ 22 E3 5c
Rockin’ Peacock S 5.10a/b 6a+ 19 VI+ 19 E2 5b
Upper Cut TR 5.11 6c+ 23 VIII- 23 E4 5c
Type: Sport, 60 ft
FA: Climberdude
Page Views: 495 total · 11/month
Shared By: Climberdude on Jul 14, 2014
Admins: Justin Johnsen, Kyle Stapp

You & This Route

6 Opinions

Your To-Do List:

Add To-Do

Your Star Rating:

     Clear Rating

Your Difficulty Rating:

-none- Change

Your Ticks:

Add New Tick


Climb suspicious looking rock to first bolt.
It is quite solid though as long as you stay near the bolt line.
Continue up face paralleling 19s in the house to anchors.


15' left 19s in the house


Recently equipped with 5 bolts and anchors.


Tim Schafstall  
Don't be put off too much by the "bad rock" comments. The climb is cleaning up nicely. There is one dirty spot on the left between bolts 1 and 2 and some minor choss still, but it is not too bad and the face above is well worth getting through the bottom section. Very fun crux using cool pockets on a perfect face. Dec 2, 2016
Climberdude   Kraley
This route is fairly new.
It is a bit chossy on the left side of bolts 2 and 3.
That being said, please stay near the bolt line.

We did pry all suspect rock with a crowbar before bolting.
Now the temperature differences each day is starting to work its magic.

Definitly be cautious out there Nov 16, 2015
I haven't actually been on this route but yesterday (11/08/15) I watched a guy pull off this block around the height of the second bolt. About 7"x10"x5" so enough to do real damage. No X on it or anything. Be careful around there.
Nov 8, 2015

More About 18 and Life

Printer-Friendly Guide