Mountain Project Logo

Routes in Cascadia

Type: Boulder, 10 ft
FA: Jay Shultis
Page Views: 145 total, 3/month
Shared By: Jay Shultis on Jan 21, 2014
Admins: Aaron Parlier, Jake Jones, Shawn Heath

You & This Route


1 Opinions

Your To-Do List:

Add To-Do

Your Star Rating:


     Clear Rating

Your Difficulty Rating:


-none- Change

Your Ticks:

Add New Tick
    -none-

Description

Basically a one-move wonder into a nice V2. SDS on tiny crimps, the three starting crimps to choose from are all in the same lowest horizontal line (the center crimp is a 1/4 pad positive crimp, left is a tiny finger slot or OK sidepull, third is a small edge around the corner to the right). Feet on a large left facing crescent shaped dish, or other smears. Make a tough move or two to a good horizontal then climb the blunt arete on rad iron bands using edges, dishes and pinches to a quality mantle. Good movement, still a bit mossy up high. Needs to be climbed to stay clean!

Skipping the sit start is a fun V2ish warm-up. Thx to Mr. Metzman for scrubbing this line for us. Cascadia needs more warm-ups!

Location

Backside of the Cascadia boulder above the "backwater"

Protection

several pads would be good. The problem is low, but the mossy rocks below would be bad to fall on with poor coverage.

Photos

0 Comments