Mountain Project Logo

Routes in Cannabis Crew Wall

Cannibas Corner S 5.10b 6a+ 19 VII- 19 E2 5b
Cannibas Crew S 5.10b 6a+ 19 VII- 19 E2 5b
Chossilvania Transit Line S 5.11d 7a 24 VIII 25 E5 6a
Empty Jugs S 5.10a 6a 18 VI+ 18 E1 5a
Jugs S 5.10a 6a 18 VI+ 18 E1 5a
Lucky 13 S 5.10d 6b+ 21 VII+ 21 E3 5b
Whiskey Bench S 5.10d 6b+ 21 VII+ 21 E3 5b
Whiskey Blend S 5.9+ 5c 17 VI 17 E1 5a
Order Wrong? Sort Routes
Type: Sport, 35 ft
FA: G. Martinez 9/12
Page Views: 86 total · 1/month
Shared By: Rich Connors on May 28, 2013
Admins: Andrew Gram, Nathan Fisher, Perin Blanchard, grk10vq

You & This Route


5 Opinions

Your To-Do List:

Add To-Do · View List

Your Star Rating:


     Clear Rating

Your Difficulty Rating:


-none- Change

Your Ticks:

Add New Tick
    -none-

Description [Suggest Change]

Start on left side of arch and follow the crack feature through 4 bolts. After 4th bolt, cross over a ledge and up toward anchor on face above. Crux is pulling over/around the roof. Starts near Chossylvania, but climbs out of alcove almost immediately.

Beware of loose rock!! Route should clean up with more traffic.

Location [Suggest Change]

Starts near Chossylvania, but climbs out of alcove almost immediately. Refer to beta photo on Cannibus Crew Wall page.

Protection [Suggest Change]

Protects with quickdraws (6 bolts) to bolted anchor with chains.

Photos

- No Photos -
Jeremy Polk
Sandy, UT
5.10b/c
Jeremy Polk   Sandy, UT
5.10b/c
This is a fun route that has a little bit of everything from a jug-haul to a lieback dihedral to a mantle/traverse to crimpy slab. It has a trad feel and could probably be protected with gear up to #3 or #4 but the rock is so chossy and dirty that I wouldn't want to. Also of note, this route and most of the others on this wall can be easily set up for top-rope. And because of the choss, there is a ton of rockfall at this crag. Feb 15, 2014
BobGray
Salt Lake City, Utah
  5.10d
BobGray   Salt Lake City, Utah
  5.10d
Some of the bolt hangers I've used in the past to set up a top rope for this area have been removed. The anchors can still be reached with some very creative aiding trickery but is not recommended. Mar 26, 2014

More About Whiskey Bench

Printer-Friendly