Adventure Projects is hiring an Android engineer to join us in Boulder, CO
Mountain Project Logo

Routes in Toxic - Tang Area

Even Steven T 5.11b 6c 23 VIII- 23 E3 5c
Even Steven (lower left) T 5.8 5b 16 VI- 15 HVS 4c
Geek Corners T 5.10b 6a+ 19 VII- 19 E2 5b
Journey to the other side of the bridge T 5.8 5b 16 VI- 15 HVS 4c
Roadside Floral Curtain S 5.12 7b+ 27 VIII+ 26 E6 6b
Slapshot S 5.12a 7a+ 25 VIII+ 25 E5 6a
Tang T 5.11c 6c+ 24 VIII- 24 E4 6a
Toxic Shock T 5.9 5c 17 VI 17 HVS 5a
View from the Bridge, The T 5.10d 6b+ 21 VII+ 21 E3 5b PG13
Order Wrong? Sort Routes
Type: Trad
FA: S. Strong, J. Nelson, '82
Page Views: 612 total · 10/month
Shared By: Jon Nelson on May 5, 2013
Admins: Scott Coldiron, Jon Nelson, Micah Klesick

You & This Route


8 Opinions

Your To-Do List:

Add To-Do · View List

Your Star Rating:


     Clear Rating

Your Difficulty Rating:


-none- Change

Your Ticks:

Add New Tick
    -none-
Access Issue: 2018 Seasonal Raptor Closure: Upper pitches of the Diamond Details

Description

A short, pure-stemming corner.

If leading this seems too intimidating for you, then you can climb to the top via the 5.8 just left of the corner, and easily set up a TR.

Location

Obvious 90 degree open book just left of Toxic Shock.

Protection

Thin wires. Take particular care to securely set the first few. Originally, bomber RPs (narrow brass, brazed wired nuts) were used, but offset brazed nuts (e.g., HBs) may work even better.

Photos

Stig .
Seattle
Stig .   Seattle
I started cleaning that left leaning crack above this route and I even put anchors in, but that was before I knew what I was doing. They are stainless and galvanized mix... yikes. I gave up on that project though because of how hollow the blocks sound up there. Fun climbing though. I wonder if TVFTB will ever get cleaned.... May 3, 2017
Jon Nelson
Redmond, WA
  5.10d PG13
Jon Nelson   Redmond, WA  
  5.10d PG13
That line above does look thin and flaky. Perhaps Stamati, it could just be a TR route? May 4, 2017

More About The View from the Bridge

Printer-Friendly