Mountain Project Logo

Routes in Atlantis Slab

Above the .11 S 5.8 5b 16 VI- 15 HVS 4c
Aquaman Arete S 5.8 5b 16 VI- 15 HVS 4c
Black Bart (aka Unknown 1) S 5.11a 6c 22 VII+ 22 E3 5c
Dam The Water Board T 5.8 5b 16 VI- 15 HVS 4c R
Drefach Lambda S 5.6 4c 14 V 12 S 4b
Fluff Boys T 5.9+ 5c 17 VI 17 E1 5a
Hot Lava (aka Soliloquy) T 5.8 5b 16 VI- 15 HVS 4c X
Island Rhythm TR 5.11b 6c 23 VIII- 23 E3 5c
Leper, The TR 5.11c 6c+ 24 VIII- 24 E4 6a
Mermaid (AKA: unknown 2) S 5.8+ 5b 16 VI- 15 HVS 4c
Missing The Dike aka Two Dikes for Dinner S 5.9 5c 17 VI 17 HVS 5a
Natives are Restless, The TR 5.11d 7a 24 VIII 25 E5 6a
No Bore a Bora T 5.10c 6b 20 VII 20 E2 5b
Sea Serpent (aka: Unknown 4) S 5.9 5c 17 VI 17 HVS 5a R
Seventh Wave T,S 5.11b 6c 23 VIII- 23 E3 5c
Snark Hunt T 5.9 5c 17 VI 17 HVS 5a
This Bolt's For You T 5.10d 6b+ 21 VII+ 21 E3 5b R
Tim's Variation TR 5.9+ 5c 17 VI 17 E1 5a
Tim's Walkway S 5.6 4c 14 V 12 S 4b
Transformer T 5.10a 6a 18 VI+ 18 E1 5a
Trident (aka: Unknown 3) TR 5.8 5b 16 VI- 15 HVS 4c
Unknown TR TR 5.12b 7b 26 VIII+ 26 E5 6b
Unsupervised Bolting S 5.10a 6a 18 VI+ 18 E1 5a
Order Wrong? Sort Routes
Type: Trad, 85 ft
FA: John McMullen, Marc Hirt, Tum Hudgel
Page Views: 203 total · 3/month
Shared By: mlauwers on Mar 24, 2013
Admins: Leo Paik, John McNamee, Frances Fierst, Monty, Monomaniac

You & This Route


3 Opinions

Your To-Do List:

Add To-Do · View List

Your Star Rating:


     Clear Rating

Your Difficulty Rating:


-none- Change

Your Ticks:

Add New Tick
    -none-

Description

Start on the tiny seam with balancy moves, and gain the small ledge. The crux is probably the awkward bulge above the single bolt found on this route. Finish at the anchors of Dam The Water Board.

Location

No Bore a Bora starts to the right of Dam The Water Board and ends on the same anchors as Dam The Water Board as well.

Protection

1 bolt with standard rack.

Photos

Jay Eggleston
Denver
  5.10c
Jay Eggleston   Denver
  5.10c
This seam has lots of vegetation in it and does not protect that well. There is one fixed nut and gear like C3s would be good to have. The biggest piece I placed was a 0.75 Camalot. It is not easy to clip the bolt, but there is a ledge to land on if you fall doing so. Oct 28, 2015

More About No Bore a Bora

Printer-Friendly