Mountain Project Logo

Routes in Deers Leap (Windham)

Broken Toe (Walk On The Wildside Variation) T 5.8 5b 16 VI- 15 HVS 4c
Dihedral T 5.5 4b 13 IV+ 11 MS 4a
Georges Route T,TR 5.6 4c 14 V 12 S 4b
Goofer's Roof Right T 5.10a 6a 18 VI+ 18 E1 5a
Hooterville (most obvious version) T 5.5 4b 13 IV+ 11 MS 4a
Hungarys Burnt (a.k.a. the Dogs Face Crack) T,TR 5.9+ 5c 17 VI 17 E1 5a PG13
Unknown T,TR 5.7+ 5a 15 V+ 13 MVS 4b
Unkown T,TR 5.11a 6c 22 VII+ 22 E3 5c
Walk on the Wild Side T,TR 5.7 5a 15 V+ 13 MVS 4b
Type: Trad, TR, 45 ft
FA: Unkown
Page Views: 94 total, 2/month
Shared By: Jeremy A on Nov 29, 2012
Admins: Jay Knower, M Sprague, lee hansche, Jeffrey.LeCours, Robert Hall

You & This Route


2 Opinions

Your To-Do List:

Add To-Do

Your Star Rating:


     Clear Rating

Your Difficulty Rating:


-none- Change

Your Ticks:

Add New Tick
    -none-

Description

This balancy route holds your attention as you follow 2 bolts on the right side of Andy's cliff. To make it safe you should carry a mid size cam to place in a seam before the 2 bolt anchor.

Location

Right side of Andy's Cliff (Middle Cliff). Right of the obvious triple corners roof.

Protection

2 bolts. 1 mid sized cam. There is a 2 bolt anchor at the top. Caution s/b exercised when setting up a TR as the bolts are below the lip.

Photos

- No Photos -
Just Jesse
Methuen, MA
Just Jesse   Methuen, MA
Haha... It didn't seem too sketchy at the time. I couldn't pull it out by hand anyhoo. The rest of the bolts (here and at the overhang) all seemed pretty bomber. Next time i'm out there i'll yank the loose one so nobody gets hurt. If anyone wants to show/teach me how, i'll pick up the hardware/glue to fix it. May 14, 2013
M Sprague
New England
M Sprague   New England  
I wouldn't trust a wobbly glue-in!..unless it is glued threaded rod and just the hanger wobbling because it needs the nut tightened. If it is a regular eyed glue-in, that should be removed ASAP and replaced. I would suspect and carefully check any others placed by the same person too. If it is a case of not properly filling the hole with enough glue, it may be very hard to tell though. Have somebody experienced check it out right away. May 7, 2013
Just Jesse
Methuen, MA
Just Jesse   Methuen, MA
The left bolt of the 2 bolt anchor on this is a bit wobbly... I trusted it, but you may not. Anyone know how to properly fix a glue-in? May 6, 2013