To save paper & ink, use the [Hide] controls next to photos and comments
so you only print what you need.
Offspring
5.12a,
Sport, 60 ft (18 m),
Avg: 3.1 from 9
votes
FA: Bryan Burdo (1995)
Washington
> Central-W Casca…
> N Bend & Vicinity
> Exit 38
> Far Side
> Overhaul Area
> (b) Motherland
Description
Start in the cave uphill of the main corner. Pull through the first few bolts on jugs with good feet, getting to the interesting part. Then the feet get more difficult, the fit gets tight, and the holds start to get tougher to find and less positive.
Wild position with some possible chimney moves will get you to a (wide) stance and option to go right to stay on Offspring or left to finish on Hovering Mother.
The final moves felt tough, with slick feet and more jams than holds. Pull right over the final lip and clip the chains.
Location
Shared start with Hovering Mother in the middle of the main cave
Protection
7 fixed draws and mussy hooks
[Hide Photo] Bad picture, but gives you an idea of what you're dealing with here
[Hide Photo] scramble up into the cave. The route goes up the (occasionally seeping) roof crack.
Rent-n, WA
Tacoma WA
-Burdo, Shawn S and I rebolted this, we decided to add a bolt below the anchor
-Nate Riley bought permadraws for the route
-I fucked up several of the glue ins due to poor wave bolt quality control, couldn't hammer em in and the glue set while they were half way. So I bent those over and put the permadrsws on the old bolts (which are fine really).
- so - it's really ugly right now, but it is safe to clip all the fixed draws and climb it. I intend to return this year with a oscillating saw and more glue ins to put it back together right. Jul 26, 2023
Seattle WA
Only rebolting I did on this route was belaying danny & some scrubbin! I take no credit for any of the hardware on route! Jul 26, 2023