Mountain Project Logo

Routes in (2) Dropzone Area

Child Abuse T 5.8 5b 16 VI- 15 HVS 4c
Dwarf Toss T 5.8 5b 16 VI- 15 HVS 4c PG13
Far Side T 5.6 4c 14 V 12 S 4b
Happy Ending T 5.10 6b 20 VII- 19 E2 5b
Mark it Eight, Dude T 5.9 5c 17 VI 17 HVS 5a PG13
Mark it Eight, Dude with the "Smokey" extension T 5.9+ 5c 17 VI 17 E1 5a PG13
Tribal Therapy T 5.8+ 5b 16 VI- 15 HVS 4c
Type: Trad, 100 ft
FA: Bryan Smith, Tyler Kamm 4/21/10
Page Views: 119 total · 1/month
Shared By: adam winslow on Aug 18, 2010
Admins: Scott Coldiron, Jon Nelson, Micah Klesick, Nate Ball

You & This Route

2 Opinions

Your To-Do List:

Add To-Do · View List

Your Star Rating:

     Clear Rating

Your Difficulty Rating:

-none- Change

Your Ticks:

Add New Tick


Stem up dihedral just left of "Child Abuse" using small and funky gear, then transition onto a uniquely featured but cryptic face with bolts. Mantle onto ledge, then battle through a steep crack section before escaping right to the anchor.


This is the westernmost route encountered on the main cliff.


Gear to 1", 2 bolts.


Today I saw someone had slung a giant block 2/3 the way up this route (and under the 5-10 crack crux finish) and left two biners as an anchor. Assuming they did so because of some blackberries on the ledge they stopped just below. Just curious about the story there. I will try and clean the ledge, this really is a good route if you re a 5-10 climber, appearances aside. i took the time to bolt it! Sep 17, 2016
This route is easy to find: Look for 4 bolts at the very west end of the crag, or in other words, the first route you walk under if you've hiked over from Ozone. In April 2014 I added 2 bolts to the start of the route; it's still stressful but much safer. After the initial 4 bolts, it's all gear to reach the anchor (nuts, a double set of cams from orange TCU through 1 inch, plus a single 2 inch piece). The crux is the shiny and blank-looking boulder problem just below the anchor, so place enough gear to keep you off the ledge as you gun it for the anchor! Aug 31, 2010

More About Happy Ending

Printer-Friendly Guide