Mountain Project Logo

Routes in Silverado Mine

Beginner's Route T 5.4 4a 12 IV 10 VD 3c PG13
Bolt Route T,TR 5.10b/c 6b 20 VII 20 E2 5b
Dihedral T 5.5 4b 13 IV+ 11 MS 4a PG13
Dynamite Cave V4 6B
Dynamite Crack V1 5
Dynamite Traverse V2 5+
Fir Tree Crack T 5.6 4c 14 V 12 S 4b
Fir Tree Overhang T 5.7 5a 15 V+ 13 MVS 4b PG13
Fractured Seam T 5.8 5b 16 VI- 15 HVS 4c PG13
Jamcrack T 5.7 5a 15 V+ 13 MVS 4b
Left Corner T,TR 5.9 5c 17 VI 17 HVS 5a
Mine Shaft T 5.6 4c 14 V 12 S 4b R
Mossy Crack T 5.5 4b 13 IV+ 11 MS 4a
Mossy Face T,TR 5.8 5b 16 VI- 15 HVS 4c
Overhang T,TR 5.9 5c 17 VI 17 HVS 5a R
Right Corner T,TR 5.7 5a 15 V+ 13 MVS 4b
Shattered Slab T,TR 5.10a 6a 18 VI+ 18 E1 5a
Type: Trad, 75 ft
FA: unknown
Page Views: 448 total · 5/month
Shared By: Floyd Hayes on Jul 13, 2010
Admins: Aron Quiter, M. Morley, Adam Stackhouse, Salamanizer suchoski, Justin Johnsen, Vicki Schwantes

You & This Route


8 Opinions

Your To-Do List:

Add To-Do

Your Star Rating:


     Clear Rating

Your Difficulty Rating:


-none- Change

Your Ticks:

Add New Tick
    -none-
Mt. St. Helena Crags - Fire Damage from Fall 2017 Details

Description

This climb is just to the right of Right Corner. Climb the blocky wall to the right of Right Corner and mantel to a sloping ledge. Climb a few moves to a narrower sloping ledge, then move left to a fractured seam which begins with an overhanging bulge (crux). Climb the fractured seam to the top, staying a few feet to the right of the arete of Right Corner.

Location

Enter the narrower constriction in the gorge and start at the base of the large blocks to the right of Right Corner.

Protection

1 set of cams, 1 set of nuts. A marginal small cam placement in the fractured seam protects the crux overhang move at the base of the upper headwall; a large cam can be placed below and right of the overhang to prevent a long, painful fall if the smaller cam fails. Two old bolts on the right side of the summit pinnacle can be used for the anchor but should be backed up by gear.

Photos

0 Comments

More About Fractured Seam

Printer-Friendly Guide