Type: Sport, 3 pitches
FA: unknown
Page Views: 2,989 total · 24/month
Shared By: blakeherrington on Sep 23, 2008
Admins: Scott Coldiron, Jon Nelson, Micah Klesick

You & This Route


42 Opinions

Your To-Do List:

Add To-Do · View List

Your Star Rating:


     Clear Rating

Your Difficulty Rating:


-none- Change

Your Ticks:

Add New Tick
    -none-
Access Issue: Respect the small area that may still be signed off. Details

Description

Follow the left-curving cracks and flake, past a crux at the bottom, and into a short L-Facing corner to the chains. This is a pretty blatantly bolted crack, but I guess all the other climbs are fully bolted. Still fun!

There are supposedly 3 pitches total, as well as a slightly harder variation that moves right about 1/2way up. The description here is for P1.

Location

Park on the South side of Hwy20, at the East end of "town".
Walk along hwy 20 for ~150yrds to a trail on the left, which leads to the wall in about 30 seconds.

The fourth-most route to the left. Begin just before the ground slopes up to your right. This is basically right where the trail from Hwy20 meets the road.

Protection

14 bolts, then fixed draws at anchor.

Photos

jonah
  5.10b
jonah  
  5.10b
Fun route. There is a 5.8 second pitch then a fun and tricky 11c third pitch which could use a little cleaning. Sep 27, 2008
Really great climb. Bolted crack, with some real hero moves. Fun stuff. Sep 26, 2012
Eric8
Maynard, MA
  5.11b
Eric8   Maynard, MA
  5.11b
The third pitch is now clean and worthwhile. If doing so link the first pitch with the short 5.8 pitch to avoid the hanging belay. To do this you will need ~20 draws or you can skip/back clean a few bolts. Aug 16, 2013
Very fun route on trad! Protectable and good placements but I'd give it a PG13 rating. Fun placement in the pocket a few feet off the deck, which is also the first placement.

Single rack from thin fingers to #4 and stoppers if i remember correctly. Jan 20, 2014
14 bolts to anchors with fixed draws Jul 29, 2017
Jon Nelson
Redmond, WA
Jon Nelson   Redmond, WA  
Thanks Joe, I updated the info above. Jul 30, 2017