Mountain Project Logo

Routes in Casket Quarry ICE

Type: Sport, Mixed, 80 ft
FA: Mike Dahlberg
Page Views: 411 total · 3/month
Shared By: James Loveridge on Jan 28, 2008
Admins: Kris Gorny, Chris treggE

You & This Route


3 Opinions

Your To-Do List:

Add To-Do · View List

Your Star Rating:


     Clear Rating

Your Difficulty Rating:


-none- Change

Your Ticks:

Add New Tick
    -none-

Location [Suggest Change]

See Big Blue

Description [Suggest Change]

Climb the RIGHT side of Big Blue to where the ice ends in the alcove on the right. The first bolt is on the wall to the right and might need to be chopped out. climb up and out alcove looking for a black bolt ofer on the face to the right (this one needs a 24” runner). Continue up to a seam/right facing corner to the top ice. The anchors are off to the Left a bit and often covered in ice. If it’s thick, I recommend topping out on the ledge and using the prominent set of anchors above. Do future parties a favor and chop out the anchors below the lip on the way down. This is the best and most straightforward of the 3 mixed finishes.

Protection [Suggest Change]

5-7 Screws for Big Blue and 2 QD’s and a 24” runner for the 2nd bolt. NOTE: a 24” long runner is suggested for clipping the second bolt that is out on the face to the right. If you don’t do this you’ll have a zig-zag that goes around a corner, not a good thing…

Photos

0 Comments

More About T) Big Blue: RIGHT Mixed Finish

Printer-Friendly