Mountain Project Logo

Routes in Lakeview Area

Edgestacy T,TR 5.11a 6c 22 VII+ 22 E3 5c R
Guppies with a twist T 5.12a 7a+ 25 VIII+ 25 E5 6a
Lakeview T,S 5.10b 6a+ 19 VII- 19 E2 5b
Squeeze Job T,S 5.10 6b 20 VII- 19 E2 5b PG13
Zinnea's Zen T 5.11b 6c 23 VIII- 23 E3 5c
Order Wrong? Sort Routes
Type: Trad, Sport, 2 pitches
FA: Nathan Brown, Amber Russell Jan '03
Page Views: 730 total · 6/month
Shared By: nbrown on Dec 3, 2007
Admins: Aaron Parlier, Steve Lineberry

You & This Route


6 Opinions

Your To-Do List:

Add To-Do · View List

Your Star Rating:


     Clear Rating

Your Difficulty Rating:


-none- Change

Your Ticks:

Add New Tick
    -none-

Description [Suggest Change]

This is a fun short slab route that was originally done with only the first 2 bolts. It finished up and left and around the small overlap/flake at the top to a s/s nut anchor that seems to keep disappearing. There was a 2 bolt anchor added, as well as a better and more direct finish, also protected by a new bolt. The old variation was slightly harder by going left at the second bolt (5.11-).

P-1 Climb up a short section of steepish rock to a high bolt (either stick clip, sling tree, or don't fall!). Note: There is a cam placement about 8' off the ground that some folks find useful. Continue up on some cool friction and small crystals to another bolt. A few crystals from the FA have broken making this whole section a bit less secure. Climb up and slightly right past some pockets (red tricam in one) to a stance and a 3rd (new) bolt. Continue up on good edges to a 2 bolt anchor (new).

P-2 Continue up and right on moderate ground to the top, or up and left into the belay for "Boot Hill".

Location [Suggest Change]

This is the obvious short slab right above the right side approach trail.

Protection [Suggest Change]

Very light rack, maybe a red tricam and a green or yellow alien size piece.

Photos

Jeff Mekolites
ATL GA
  5.10+
Jeff Mekolites   ATL GA
  5.10+
If you sling the tree, all you need is 3 draws and a red tricam. Fun, balancy and a touch spicy. Oct 27, 2014

More About Squeeze Job

Printer-Friendly