Mountain Project Logo
To save paper & ink, use the [Hide] controls next to photos and comments so you only print what you need.

Beginning of the End a/k/a Sandy Monster

5.9+, Sport, 65 ft (20 m),  Avg: 2.4 from 55 votes
FA: Dan Durland, 1991
Colorado > Colorado Springs > Garden of the Gods > Kindergarten Rock > E Face
Warning Access Issue: 2023 Seasonal Closure - lifted DetailsDrop down
Warning Access Issue: 2024 Seasonal Closures - these are the same as 2023 DetailsDrop down

Description

The first route right of Bob's Buttress Crack (and the only route between Bob's and Ormes' Chimney), ascends the slightly overhanging face on solid, incut holds, with some old drilled angles for pro. Climb straight up the face, passing the Bob's Buttress belay on the right, to another two-pin anchor about 15 feet up.

Rap off from here. There is a bit of a runout to the first pin.

Per Tim Stich: This route at one time had 4 pins, but now only one remains. An epoxy hole shows where one pin once sat. At present, toproping the route from the chain anchor on Bob's Buttress Crack is your best bet.

This is a combination two entries. To avoid duplication in the database, we've deleted the 2nd entry.

Location

Per Tim Stich: this is the line directly right of Bob's Buttress Crack on the face but before Ormes Chimney.

Protection

QDs.

Photos [Hide ALL Photos]

I hope I correctly list this photo (no other photos exist to confirm this sport route).
[Hide Photo] I hope I correctly list this photo (no other photos exist to confirm this sport route).
Jameson leading Sandy Monster.
[Hide Photo] Jameson leading Sandy Monster.

Comments [Hide ALL Comments]

[Hide Comment] The crux move is just below the anchors and used to be protected by a bolt. The bolt is no longer there which makes this climb much more interesting. However before the crux there is the option to do a short, easy traverse to the left to the anchors on Bob's Butt Crack if you don't want to risk the possible runout. Oct 26, 2001
Darin Lang
  5.9+
[Hide Comment] This would indeed be more interesting without that last bolt/pin (I'm remembering a drilled pin and not a bolt, but it's been a while). Was it chopped or did it just come out? Oct 26, 2001
[Hide Comment] Originally the route was unnamed, way back then I figured it was just a route why would it need a name? Later on Sandy Monster stuck as the incut holds would collect sand after a good rain; always a sign of high quality stone.

In 1988, I put in 4 drilled pins to a 2 pin anchor with webbing and I do recall that it was a fair distance (10ft +/-) to the first pin but the climbing was easy. Somewhere along the way I heard that some of the protection changed or was moved but I do not know the details as I have not been up there in years. Dec 20, 2001
[Hide Comment] I was the coward listed above (oops, I forgot to put in my name). It may have have been a drilled pin (I don't know because I didn't see anything). When I climbed it last fall I couldn't find the pin/bolt and my second couldn't either. I thought we were just blind and had missed it but then talking to another local climber about it he said it was no longer there, so I thought I would just pass along what we saw (or should I say didn't see). I plan to go look when it gets warmer and will make certain if the pin is there or not. I would hate to be giving bad information just because none of us could see it, so if anyone knows otherwise for sure please post a message. Jan 24, 2002
[Hide Comment] We checked this route out the other day, and could see no fixed pro at the crux either. Unless you can pull 5.9+ face moves in your sleep, I would highly advise the traverse to the Bob's Butt Crack anchors after pin 2. May 30, 2002
[Hide Comment] Verified it finally, the pin was pulled by the looks of the hole where it used to be. Jul 1, 2002
Larry Shaw
  5.10a
[Hide Comment] The first and third pins are gone...the first pin is now about 40' off the deck with 5.7ish moves to get to it. Mar 15, 2004
[Hide Comment] Spooky...we all know the story with the runout to the first pin in the garden, but give me a break here...40 feet above a 40% grade full of microwave sized boulders is not exactly how most of us spell party. Call me a weenie all you want, but will someone please retrobolt the start to this thing? I won't tell if you wont... Mar 30, 2004
Darin Lang
  5.9+
[Hide Comment] That wouldn't offend my sensibilities, keeping in mind that my middle name is "Yella". I thought it was a bit runout, even by GoG standards, when there were still three pins. Mar 30, 2004
[Hide Comment] This would be a great one to rebolt - I took the easy way - on TR after doing Bob's Butt Crack. Lots of fun moves - it must be less than the 5.9+ if you just go to the BBC anchors. Worth the time, but can't say enough that this one seems like it could be a great sport climb if anyone wanted to be that cool. Apr 1, 2004
Andito
Colorado Springs
[Hide Comment] This used to be one of my favorite leads back in the mid-nineties. I moved away for about ten years, and when I got back, half the bolts were missing. I climbed it from the End of an Era anchor the other day and remembered why I loved it so much. I'd like to re-bolt this. Does anybody know the policy on bolting at The Garden? (i.e. should it be done at four a.m. with a full moon, or is noon on a Saturday fine?) May 28, 2010
[Hide Comment] Brian Shelton and I, along with David Mason and Robb Conner, took out the old pitons and rebolted Sandy Monster and End to End with beefy new bolts. Some of the angles were solid, but most came out without too much work. So climb on.... Thanks, Dave and Robb, for buying the hardware! Aug 18, 2012
S.Stelli
Colorado Springs, CO
  5.9+
[Hide Comment] Thanks for the new hardware on this great route! Very fun! Aug 27, 2012
[Hide Comment] I climbed this route yesterday, and the nut on the second to last bolt (crux protection) was loose. I didn't have a wrench on me, so I tightened it as best I could with my fingers. The bolt itself appeared solid. Dec 8, 2014
Kyle Fahrenkrug
Fort Collins, CO
 
[Hide Comment] Did this route a week ago. Very fun route, but one of the top 2 bolts (sorry I do not remember specifically which one) is INCREDIBLY loose. I did not have the tools to tighten it, but I highly recommend someone does before anyone else climbs it. Sep 11, 2016
Rope Byrne
Colorado Springs
[Hide Comment] The 4th bolt up is bad news. It has been fallen on several times and can no longer be relied on. While testing it, I could pull it out of the hole relatively easily with just my fingers. A wrench on it was successful in tightening it until weight was applied to the hanger. It appears that this one has been replaced previously (or perhaps someone drilled a new hole?). At any rate, I wouldn't recommend climbing above this bolt until it has been repaired/replaced.

Update: today (2017-06-20) a climbing party went past the bolt and said that it seemed a-ok. I'm skeptical, but use your best judgment on it. He said that it appeared to have been tightened down. Jun 15, 2017
Sandra Kemp
Colorado Springs, CO
 
[Hide Comment] This is in bad shape. The second bolt is gone, making for a long and dangerous runout to the third bolt. The third bolt is spinning. Jun 1, 2018
Davis Badger
San Luis Obispo
[Hide Comment] Echoing Sandra, as of a few weeks ago the 2nd bolt is missing, leaving some of the hardest moves of the climb completely unprotected. The climb is essentially unclimbable until the bolt gets replaced. Trying to skip over to the 3rd bolt would make a groundfall possible for 15-20 feet of pumpy moves. I would highly recommend staying off until it can get fixed. Jul 8, 2018
[Hide Comment] A few days ago, Brian Shelton, CJ Sidebottom, and myself with the Fixed Hardware Committee for the Pikes Peak Climber's Alliance replaced the missing 3rd and 4th bolts with glued-in Wave bolts. Hopefully these will hold, since the epoxy is stronger than the rock. That said, the sandstone in that section of the route is like dry brown sugar, and the holes for the bolts took about 10 seconds to drill. Sep 29, 2018
[Hide Comment] Does anyone have any information on why the first bolt was removed? Jun 14, 2020
sandrock
Colorado Springs, CO
[Hide Comment] The missing first bolt makes this incredibly runout for the first section of the climb. PPCA, please re-bolt it! Jun 16, 2020
Noah Grage
Colorado Springs. Co
 
[Hide Comment] My buddy Eric “removed” the first bolt with a gentle tug… literally was dangling out… thought it would be better than someone clipping it thinking it’s good and hitting the ground. Still not that bad it’s 5.6/7 to the new first bolt Oct 2, 2020
Kyle O
  5.10b
[Hide Comment] The crux on this climb is at least 5.10b and nowhere near 5.9+. The bolts on this climb are very spaced out as well. Also, about an inch of the epoxy on the 4th bolt at the crux is gone — not sure if that’s due to people falling in it or what. It’s probably still fine but not the most confidence inspiring. Nov 5, 2023