Mountain Project Logo
To save paper & ink, use the [Hide] controls next to photos and comments so you only print what you need.

Grease Bunny

5.7, Sport, 40 ft (12 m),  Avg: 1.7 from 62 votes
FA: Jason Stevens
Utah > Central Utah > Maple Canyon > Maple Canyon Rd > Rd Kill Wall

Description

Just up from Massengile is this 4-bolter

Protection

2 anchors are at the top, and 4 draws for the climb.

Location

First route right of the groove/depression in the middle of the wall.

Photos [Hide ALL Photos]

Clipping the 3rd bolt of Grease Bunny
[Hide Photo] Clipping the 3rd bolt of Grease Bunny
First bolt of Grease Bunny
[Hide Photo] First bolt of Grease Bunny

Comments [Hide ALL Comments]

Brian Reyman
Fort Collins, CO
 
[Hide Comment] This climb is just short of my saying to avoid it. The moves are mostly forgettable and the chain placement is the worst I've seen in a while. They're several feet higher than they should be and necessitate holding on with one hand and pumping out - or reaching way up (and I'm 5'10") to deal with them. My 5'5" daughter got fairly pumped to set up some QuickDraws on the chains to lower down before I went up. In total, they made a so-so climb my least favorite, by a good margin, on this wall. Jun 8, 2022
Jackson Chambers
Springville, UT
  5.8
[Hide Comment] Chains are in a great place to top rope off of. There's a massive jug underling with wide feet that you can work on the anchors from. Jun 15, 2024
Jon Aronoff
Salt Lake City
[Hide Comment] The anchors are in a fine spot for clipping. However, a good inch or so of the bolts is now visible as the rock around them has fallen off. The climb itself is fun but quite short. We decided it wasn't worth top roping given the condition of the anchors and I downclimbed. If you downclimb this is almost a full-length route. I also never found the bunny-ear hold that this climb is named after... Jul 17, 2025