Mountain Project Logo
Climb
MTB
Hike
Trailrun
Ski
All Locations > Wyoming > Devils Tower > S & E Faces > Bon Homme Variation (5.8 5b 16 VI- 15 HVS 4c)
Rick Winters nearing the top of the complete first pitch. This section is actually two cracks in a corner, with plenty of perfect handjams and pro.
ID 113655088 · · Copyright Violation?
Be brave!
There was a little surprise waiting for me in the beginning off-width.
Rate Photo
Rating Rating Rating Rating Rating      Clear Rating
  5.0 from 1 vote
Brad Schildt
Oct 2, 2017
“Rick Winters nearing the top of the complete first pitch. This section is actually two cracks in a corner, with plenty of perfect handjams and pro.”  

0 Comments

Nearby Photos

summit Glory
Frank Sanders Leading the 1st LONG Pitch of Bon Hamme (Horning Variation)...Simply a Beautiful Climb !!!
This is a good view of the traverse on the first pitch. Don't start traversing until your hands are in the horizontal crack.
Location of route relative to Durrance (leaning column in lower left). Black X's = mid-pitch hanging rap stations, yellow X's = bolted anchors on ledges. There's a set of rap rings at the base that you can use to rap back to the approach "trail"
Be brave!
Rick Winters nearing the top of the complete first pitch. This section is actually two cracks in a corner, with plenty of perfect handjams and pro.
There was a little surprise waiting for me in the beginning off-width.
Placing gear deep inside on the approach to the traverse.
The climber is at the traverse. Delicate face moves are made from the wide Bon Homme on the right to a narrow variation crack on the left.
After doing the high traverse. If you're planning on linking P1 and P2, you don't want to place gear for a while in the left crack.
Peering around the corner. Perhaps this is the correct traverse line? I traversed higher where it's steeper, but where there is a horizontal crack for gear and your hands.
Gettin it!
Welcome

Join the Community

Create your FREE account today!
Already have an account? Login to close this notice.

Get Started