Mountain Project Logo
Gregger Man > ACE
Pins from Werk Supp
ID 108555842 · · Copyright Violation?
Crux bolt removed from Apple Strudel.
New Vertigo rap anchor
Rate Photo
Rating Rating Rating Rating Rating      Clear Rating
  0.0 from 0 votes
Gregger Man
Jan 4, 2014
“Pins from Werk Supp”  

3 Comments

Sort by: Oldest Drop down
Newest Oldest Popular
loading

Nearby Photos

The DragonCam that had been stuck for a while at the lip on the final pitch of Vertigo.<br> Still good. Put it on your Indian Creek rack.
Doodad tools. Latest improvement to the spinner tool: use a 1/4" steel rivet for the stop pin. A piece of bicycle tube keeps it in place if you need to reverse the drill off the stud (the previous pin could go flying.)
Improved P3 anchor - Removed a huge pile of wedged tat (had to use a funkness device to get each piece out of the crack.) Replaced it with a climbing rope inside a 1" tubular webbing sheath tied in two loops. The first loop has its own forged ring and is tied with a water knot. The tails of that loop go around again with another forged ring and end in a double fisherman's knot. The webbing should protect from UV for a long while and keep more tat from appearing.
New anchor for Atom Smasher.
New 1/2" SS anchors for Sunrider
Rusty 3/8" anchors removed from Sunrider
Hardware removed from 'Laughing at the Moon', replaced with 1/2" stainless.
Wind Tower middle ledge near 'Left Out' after the trundle/sweeping.
Bolts from Quadrille and Toys for Tots. The Toys lead bolt came out with maybe a couple hundred pounds of axial force. The second lead bolt was so bent and abused that I could only funk on it and it broke.
Bolt spinner tool with 1/4" pin instead of a jam nut.<br>
Apple Strudel upgrade
Crux bolt removed from Apple Strudel.