Mountain Project Logo
Climb
MTB
Hike
Trailrun
Ski
Matthew Fienup > Miscellaneous
This is the setup that I routinely use when I have built a top-rope anchor that is extended some distance over an edge and I need to rappel that route. I, in effect, rappel a separate strand of rope (using the munter) to get to the extended masterpoint. I pre-rig the rappel on the actual climbing rope, before I begin descending with the munter.
ID 106529739 · · Copyright Violation?
Tyrolean Traverse Set-up II<br> <br> -For heavier climbers, climbers with a backpack, and long traverses, I add a chest harness to the setup (The BD Vario Chest harness is excellent--in this photo, we've improvised with a sewn runner)
Setup for top-rope soloing with the Petzl Basic ascender.
Rate Photo
Rating Rating Rating Rating Rating      Clear Rating
  0.0 from 0 votes
Matthew Fienup
Aug 28, 2009
“This is the setup that I routinely use when I have built a top-rope anchor that is extended some distance over an edge and I need to rappel that route. I, in effect, rappel a separate strand of rope (using the munter) to get to the extended masterpoint. I pre-rig the rappel on the actual climbing rope, before I begin descending with the munter.”  

0 Comments

Nearby Photos

Tyrolean Traverse Set-up<br> <br> -Petzl Tandem Pulley on the bottom<br> -Petzl Mini Traxion on top, for progress capture<br>
Setup for top-rope soloing with the Petzl Basic ascender.
My typical Joshua Tree top-rope anchor
Petzl MiniTraxion device, my preferred device for top-rope soloing.
The reason for calling this technique "the Gondola" is that their reward for demonstrating perfect lowering technique on the top half of the route was to sit back and "ride" down the second half. <br> <br> When they were little, they enjoyed this even more than the actual climbing!
The most effective way to teach the boys to lower properly was to use a technique that the boys came to affectionately call "the Gondola." To do this, I first counter ascend up, clip myself to the tie-in knot using a PAS, and then lower together.
No Sign of climbers
Rap rings recovered from the namesake tree atop Pine Line, in Yosemite.
Extending the cordelette.
Tyrolean Traverse Set-up II<br> <br> -For heavier climbers, climbers with a backpack, and long traverses, I add a chest harness to the setup (The BD Vario Chest harness is excellent--in this photo, we've improvised with a sewn runner)
This is the setup that I routinely use when I have built a top-rope anchor that is extended some distance over an edge and I need to rappel that route. I, in effect, rappel a separate strand of rope (using the munter) to get to the extended masterpoint. I pre-rig the rappel on the actual climbing rope, before I begin descending with the munter.
Setup for top-rope soloing with the Petzl Basic ascender.
Welcome

Join the Community

Create your FREE account today!
Already have an account? Login to close this notice.

Get Started