Hi, one of the springs on one lobe has come loose and is no longer sitting in its channel. I don't mean it is sitting slightly above the lobe, as they often do, but almost completely out, including the end of the spring--which is now sticking 2cm out from the lobe. Any one found a way of getting the spring back where it should be?
I've seen this happen with CCH Aliens. The 90* bend in the end of the spring isn't enough to anchor that end into the channel in the axle. I believe to fix it you need to remove the cap/nut at the end of the axle and bend a bit more crimp into the end of the spring. I don't know how TB ends are affixed; with CCH they just unscrewed (and need Loctite when they're put back on).