Mountain Project Logo

FS: Petzl Quark Nomic Ergo - Spare Bolt kits and custom 3mm/5mm allen tool

FOR SALE/WANTED WARNING: Mountain Project cannot verify the identity or trustworthiness of any member. Fraud has happened.
  • Do not use PayPal "gift" payments, wire transfers, Western Union, etc.
  • Use PayPal credit card payments, or other systems that protect you from fraud.
Original Post
randy88fj62 · · Unknown Hometown · Joined May 2010 · Points: 293

I stripped the bolt when removing the hammer from my quark and set out to replace the hardware. Since I was sourcing the hardware and because you have to buy nuts in sets of 50 I thought I'd assemble a few kits for fellow ice climbers at the same time.

If you don't want to buy my kit or want to know what part numbers I am using here is the parts list from McMaster Carr. All part numbers are McMaster numbers.

Parts List:
93935A340 - 316 Stainless Thin Hex Nuts M8 X 1.25mm thread
98035A105 - Black Oxide Washers 8.4mm ID, 16mm OD
9066A138 - 316 Stainless Steel low profile socket head screw M8 x 1.25mm thread, 20mm long
6958A15 - 5mm hex key (for head bolts on ice tools)
6958A13 - 3mm hex key (for trigrest and pawls on ice tools)

I bought enough for a friend and I and have 6 extra sets. The sets will come with one custom hex multi tool 3mm/5mm, two cap screws, two washers (for no hammer/adze setup), and two nuts.

The hex keys were TIG welded together for use in the field with gloves on. I bought long hex keys so the weld/heat affected area won't ruin the ends and cause stripping when used. The weld was sand blasted and then a light coat of orange paint to protect the weld from corrosion. The orange paint also makes the tool easy to locate.

Here are some pictures. Kits are $23 ea including shipping. Trades are also welcome. Items will ship USPS with tracking number. Payment via paypal as friend or add 3% for normal paypal. The closest kit on the market I can find is from needle sports that sells three bolts, nuts, and thin lock washer for $23. They don't include the washer. If you are in the field and have to replace a pick and you drop the washer/spacer you'd have to have an extra ready. My kit has those so you can keep climbing.

And the pics:


Hex tool tig weld


washer fits as required when not using an adze or hammer.

3mm / 5mm tig welded hex tool

3mm fits pawls and trigrest

5mm fits head bolts
edarriola · · Wasatch, UT · Joined Aug 2011 · Points: 0

I'll take one please. What's yer PayPal addy?

randy88fj62 · · Unknown Hometown · Joined May 2010 · Points: 293

I'll pm you info.

randy88fj62 · · Unknown Hometown · Joined May 2010 · Points: 293

New Years bump.

Mark Westfall 1 · · Unknown Hometown · Joined May 2015 · Points: 0

Are you still selling these?

randy88fj62 · · Unknown Hometown · Joined May 2010 · Points: 293

Yes I am mark. pm me for shipping and paypal info.

randy88fj62 · · Unknown Hometown · Joined May 2010 · Points: 293

Bump, still a few available.

Guideline #1: Don't be a jerk.

Post a Reply to "FS: Petzl Quark Nomic Ergo - Spare Bolt kits an…"

Log In to Reply