Petzl Charlet Quarks picks


Original Post
Hayden Webster · · Estes park · Joined May 2016 · Points: 0

Hey everyone! I have a pair of older Petzl "Charlet" quark tools... I was wondering if the picks for the current quarks/nomics would fit my tools. And if they don't I'd appreciate some advice on how to get some. Thanks everyone!

divnamite · · New York, NY · Joined Aug 2007 · Points: 90
Hayden Webster wrote:Hey everyone! I have a pair of older Petzl "Charlet" quark tools... I was wondering if the picks for the current quarks/nomics would fit my tools. And if they don't I'd appreciate some advice on how to get some. Thanks everyone!
No.
Dharma Bum · · Glen Haven, Co · Joined Jul 2008 · Points: 430

I found some on line last season, the old Cascade Pick. I think it was EMS.

Gunkiemike · · Unknown Hometown · Joined Jul 2009 · Points: 1,865

Nocogear

https://www.nocogear.com/collections/ice-tools/products/petzl-cascade-pick

Skibo · · Unknown Hometown · Joined Mar 2016 · Points: 0
Gunkiemike wrote:Nocogear nocogear.com/collections/ic...
Nope--not for the Quasar.
Gunkiemike · · Unknown Hometown · Joined Jul 2009 · Points: 1,865
Skibo wrote: Nope--not for the Quasar.
Uh... who's talking about Quasars in this thread?

Maybe start your own thread. Or call Lahout's (old post from them below):

Lahout's Summit Shop on Main St. in Lincoln has plenty of the 4X4 replacement picks for your Quasar.
I will be getting the slightly thinner 3mm Upgrade picks soon. Stocking lots of picks is a no brainer, like new crampon front points, everyone needs them at some point. Folks mention occasionally that they can find stuff at our store they can't get in 'the Valley' sometimes. We're not as hard core as some shops, but I try to stay stocked on the smaller, replacement items. We're at 800-730-1902 or 603-745-2882.
Skibo · · Unknown Hometown · Joined Mar 2016 · Points: 0

My mistake.

Ray Pinpillage · · West Egg · Joined Jul 2010 · Points: 0
divnamite wrote: No.
Actually yes...kind of. The bolt pattern is the same but there will be a gap at the bottom inside radius of the head where the new picks are angle cut. The new Ice and Pur will bolt in but require the spacer and will have a gap that will fill with ice and snow in use.

With that said, Petzl still makes Cascade picks for Charlet Quarks. EMS stocks them. ems.com/petzl-charlet-casca...;adpos=1o1&creative=79867306605&device=c&matchtype=&network=g&gclid=CKnQ0emq29ACFRKXfgodiQMORQ
Guideline #1: Don't be a jerk.

Post a Reply

Log In to Reply