Glue to attach loop for camelback to backpack


Original Post
Gabe B. · · Madison, WI · Joined Apr 2013 · Points: 8

As some of you know, the Arcteryx Alpha FL 30 and 45 do not have places to hang up a camel back inside. I understand the decision to not have one, but I think it reduces the versatility of the backpack for non-alpinism scenarios (day hikes for instance). I am looking for a way to attach a little loop of fabric to the inside without poking holes through the waterproof fabric. Does anyone know of a glue that would be useful and non-damaging in this scenario?

Thanks,

Gabe

t.farrell · · New York, NY · Joined Aug 2016 · Points: 0

https://www.mcnett.com/gearaid/seam-grip#10510

It'd probably be smarter to sew through the fabric and glue over the stitching. Don't do it yourself unless you know what you're doing. If you do it wrong, you'll likely tear the pack fabric

But if you insist on doing it that way (not stitching), you're going to want some type of fabric tape, like a seam sealing tape for nylon or mcnett.com/gearaid/tenaciou...

Nat D · · Seattle, WA · Joined Nov 2015 · Points: 425

Stitch and seal is the way to go. Glue will degrade over time and it will fall off. Stitch for strength and seal to restore waterproofing. Although a camelbak isn't that heavy, anything weight bearing will last longer with a proper sew job. I always sew for any gear mods I do regardless, then seal if waterproofing is required.

Mark Berenblum · · Unknown Hometown · Joined Sep 2015 · Points: 15

Agree with the sew and seal advice, but wouldn't go with tape for the seal... on anything that isn't totally flat, you'll have a hard time getting the tape to lay flat, and it won't be waterproof if it doesn't. I'd use waxed thread to sew the loop in place, then use seam grip or something similar to seal the whole thing from the inside of the bag. If the idea of poking holes in your backpack is out of the question, I'd sew a loop into a piece of fabric then glue the fabric into the inside of the bag with rubber cement. The more surface area for the glue, the better, but it certainly won't be permanent. Don't bother trying to glue a little loop directly. No matter what glue you use, it's not gonna hold.

Guideline #1: Don't be a jerk.

Post a Reply

Log In to Reply