Mountain Project Logo

Systems board holds questions

Original Post
Mackenzie Moore · · Missoula, MT · Joined Sep 2012 · Points: 380

Hey there,

So I am in the process of building a systems board. It's going to be 4 ft wide and 10 ft high and at an angle of 50 degrees maybe a little more. I am wondering what type of holds I should use for a wall at that steep of an angle. Any thoughts?

AaronBerez · · Unknown Hometown · Joined Jun 2013 · Points: 10

thats pretty steep. And its all relative to your strength. I would get some jugs pockets and slopes personally. Also consider putting campus rungs on it with a decent lip at the back. I made my own systems board and made all the holds out of old 2x4 that i cut and then sanded. Made some great slopers.

Guideline #1: Don't be a jerk.

Training Forum
Post a Reply to "Systems board holds questions"

Log In to Reply