Bolted anchor biner replacement
|
Came across some semi grooved biners the other day at an anchor and realized that in my pack I have nothing to replace them with. So the question is for the route developers and safety conscious folk out there. |
|
|
|
Not everybody is a fan of Mussy hooks and their crappy "gates". Even the climbing specific SS biners' gates tend to freeze up or get floppy after a while since the springs don't hold up. I prefer anchors without moving parts, like just two heavy quicklinks or quiucklink and ring combo on each bolt, or if you want something you can just drop your rope into, ramshorns. |
|
M Sprague wrote:Not everybody is a fan of Mussy hooks and their crappy "gates". Even the climbing specific SS biners' gates tend to freeze up or get floppy after a while since the springs don't hold up. I prefer anchors without moving parts, like just two heavy quicklinks or quiucklink and ring combo on each bolt, or if you want something you can just drop your rope into, ramshorns.+1 |
|
DQ introduced ramhorns (a pair per top anchors) to Rumney and after using them for a while, I am thinking they are the best :) |
|
In Rifle we use steel "gym" biners. |
|
|
|
We started to use the Climb Tech, or Trango steel biners, only about $6 per biner, and really hold up well. Even our most popular routes only show a little wear after a year. And they have a keeper to stop them from flipping or getting stolen. |
|
Other options- |
|
S. Neoh wrote:DQ introduced ramhorns (a pair per top anchors) to Rumney and after using them for a while, I am thinking they are the best :)+1. Modern REPLACEABLE version of cold shuts. What goes around comes around... |
|
BoltProducts seems to call the Ramshorns Pigtails and the SS ones are much cheaper than the titanium ones. Nice as they are, I think the titanium ones are overkill in most instances, unless you are in a high corrosion area or have a high budget. SS horns are more likely to wear out (can be easily replaced) long before they would corrode most times at popular US areas.
At Rumney we find the expensive clippy type anchors just don't seem to hold up well and aren't worth the expense. A good portion of the gates seem to fail quickly. |
|
M Sprague wrote: SS horns are more likely to wear out (can be easily replaced) long before they would corrode most times at popular US areas.Would you recommend using QuickLinks to attach horns to anchors? |
|
M Sprague wrote:At Rumney we find the expensive clippy type anchors just don't seem to hold up well and aren't worth the expense. A good portion of the gates seem to fail quickly.Sadly, this has proven to be the case at Rumney. Not too long ago, I experienced "lame gate" on two separate quickies in a short day of climbing and cleaning. |
|
M Sprague wrote: Nice as they are, I think the titanium ones are overkill in most instances, unless you are in a high corrosion area or have a high budget. SS horns are more likely to wear out (can be easily replaced) long before they would corrode most times at popular US areas.I agree with you about the stainless rams horns, but disagree with the "high budget" comment. Titanium has a much higher resistance to abrasion than stainless. In the Brac we lower directly from the Ti anchor bolts. This year I took a micrometer and tried to measure the wear on the anchor bolts on the most popular route there, which was rebolted with Ti in 2000. The wear was unmeasureable. You could see a polished area, and feel the difference in texture, but the wear was < .001". So if titanium rams horns last ten times longer (or more) than stainless, but only cost about twice as much, is it really fair to call them "high budget"? FYI: Ti rams horns US$12.50 |
|
John Byrnes wrote: I agree with you about the stainless rams horns, but disagree with the "high budget" comment. Titanium has a much higher resistance to abrasion than stainless. In the Brac we lower directly from the Ti anchor bolts. This year I took a micrometer and tried to measure the wear on the anchor bolts on the most popular route there, which was rebolted with Ti in 2000. The wear was unmeasureable. You could see a polished area, and feel the difference in texture, but the wear was < .001". So if titanium rams horns last ten times longer (or more) than stainless, but only cost about twice as much, is it really fair to call them "high budget"? FYI: Ti rams horns US$12.50Good points. I have been wondering about the wear resistance of titanium for a while but hadn't seen any reference to it until you mentioned it. We should try a few on some of the more popular Rumney routes and see how they do. Since the RCA (and other organizations) can cover the expense through donations and they wouldn't be directly from an individual's wallet who may be living paycheck to paycheck, the economics may indeed make more sense over time. |
|
Thanks for all the advice guys looks like ramhorns it is for now. I wonder if we could get the BD QC labs to do some testing even though it not their product. If not I'd be down to throw a couple bucks in for science |
|
thebmags wrote:Came across some semi grooved biners the other day at an anchor and realized that in my pack I have nothing to replace them with. So the question is for the route developers and safety conscious folk out there. What seems to be a good "goto" steel biner for replacing old worn links and biners ?the Trango steel wiregates are my favorites, they're inexpensive, they last a long time and the clipping action is great. The Omega gym-lite clips really well, but is super expensive. Most other steel biners (climb tech, fixe, camp, etc.) don't seem to be very easy to clip in my opinion. |
|
I much prefer the steel gym biner to the ramshorn because it is much more familiar to the majority of climbers. Plus, the trango ones are pretty cheap, only around $6-7 apiece. I am interested in Ti's resistance to wear, though, so I wish Titan made Ti Biners like the the steel ones trango makes. I'd love to never need to replace the anchor biners at my home crag |
|
It only takes a couple of uses of the ramhorns to get used to them. Peeople at Rumney seem to be tuning right in. |
|
Geez Whiz, Eric, do you have to remind us of the half worn aluminum open cold shuts which were widely used in the early/mid 90's, esp at Owens? What a nightmare, made quite an impression, could really ruin one's day. |
|
M Sprague wrote:It only takes a couple of uses of the ramhorns to get used to them. Peeople at Rumney seem to be tuning right in.Perhaps this is true, but to somebody who isn't used to them, they may seem less safe than a pair of biners. What about hypothetical gumbies that think they're unsafe and decide to lower through the quicklinks/chains attaching them to the anchor? Then you get a kinky rope, and not the good kind of kinky. Plus, they're more expensive than the Trango steel biners and when I'm paying out of pocket I'm going to go with the cheapest option that doesn't sacrifice safety or durability. Also, we have a problem here in Durango, with asshats stealing fixed hardware so the pin on the steel biners is a necessity. |