Krukonogi Picks
|
Theriault wrote: same here, got some and no.... no good for ice... just WAY to thick! Zac, I have a set of "Ice" blades for the Master`s if ya wanna try em, Ill be in your area 13-16 feb ish .From what I understand, the blades that come with the force alloy are the drytooling blade, and the ones that come with the masters are the ice? Im sorry, not trying to hijack the thread |
|
Zac.St.Jules wrote: From what I understand, the blades that come with the force alloy are the drytooling blade, and the ones that come with the masters are the ice? Im sorry, not trying to hijack the threadyes, go on the liberty mountain website and you can figure it out there |
|
Been running a set of Krunkonogi PN0As (nomic ice picks) "standard geo" THESE PICKS ARE SO CHOICE! And the company is really on point within 10 days they were at the door. |
|
So I decided against getting the Krukonogi picks for myself: for the time and money spent getting new tools and picks, it was better just to make everything myself. That said, I did get to play with a friend's drytool picks. The Krukonogi alloy was quick to work with on the grinder; I didn't try using a file. Using a 10" contact wheel, I removed the notches on the spine, beveled the teeth, put in a swedge grind, and put a hollow distal taper into the last third of the pick. Finished everything up with a Scotchbrite belt. |
|
Dang, very nice handiwork |
|
Now you can order krukonogi picks and gear in US shop: krukonogi.us |
|
Kate Hopkins wrote: Now you can order krukonogi picks and gear in US shop: krukonogi.us AH Nice!!! Bout time! |
|
Interesting. We've been supplying them for a year or so. Wonder if they're inventory is actually state side. |
|
Xam wrote: It has been said before but the armour steel is pretty easy to work with a grinder. I purchased two pairs of the points as replacements for my Lynx points, as they were cheaper than petzl at the time. 5 min on a grinder and I was able to camfer the points to a pretty good edge. I assume you could do the same with the picks if you were so inclined. Ive been told that putting hardened steel on a grinder will cause it to lose its temper. |
|
Dan Hoban wrote: You just need to keep the metal from overheating, dipping it in water after each pass, not let the metal just rub on the wheel. |
|
I had the good fortune of living in Moscow for a couple of years, cruising the small mountain shops was always fun. |